Represents a line. More...

#include <juce_Line.h>

Collaboration diagram for juce::Line< ValueType >:

Public Member Functions
	Line ()=default
	Creates a line, using (0, 0) as its start and end points. More...

	Line (const Line &)=default
	Creates a copy of another line. More...

	Line (ValueType startX, ValueType startY, ValueType endX, ValueType endY) noexcept
	Creates a line based on the coordinates of its start and end points. More...

	Line (Point< ValueType > startPoint, Point< ValueType > endPoint) noexcept
	Creates a line from its start and end points. More...

	~Line ()=default
	Destructor. More...

void	applyTransform (const AffineTransform &transform) noexcept
	Applies an affine transform to the line's start and end points. More...

Point< ValueType >	findNearestPointTo (Point< ValueType > point) const noexcept
	Finds the point on this line which is nearest to a given point. More...

ValueType	findNearestProportionalPositionTo (Point< ValueType > point) const noexcept
	Finds the point on this line which is nearest to a given point, and returns its position as a proportional position along the line. More...

Point< ValueType >::FloatType	getAngle () const noexcept
	Returns the line's angle. More...

ValueType	getDistanceFromPoint (Point< ValueType > targetPoint, Point< ValueType > &pointOnLine) const noexcept
	Returns the smallest distance between this line segment and a given point. More...

Point< ValueType >	getEnd () const noexcept
	Returns the line's end point. More...

ValueType	getEndX () const noexcept
	Returns the x coordinate of the line's end point. More...

ValueType	getEndY () const noexcept
	Returns the y coordinate of the line's end point. More...

Point< ValueType >	getIntersection (Line line) const noexcept
	Finds the intersection between two lines. More...

ValueType	getLength () const noexcept
	Returns the length of the line. More...

ValueType	getLengthSquared () const noexcept
	Returns the length of the line. More...

Point< ValueType >	getPointAlongLine (ValueType distanceFromStart) const noexcept
	Returns the location of the point which is a given distance along this line. More...

Point< ValueType >	getPointAlongLine (ValueType distanceFromStart, ValueType perpendicularDistance) const noexcept
	Returns a point which is a certain distance along and to the side of this line. More...

Point< ValueType >	getPointAlongLineProportionally (typename Point< ValueType >::FloatType proportionOfLength) const noexcept
	Returns the location of the point which is a given distance along this line proportional to the line's length. More...

Point< ValueType >	getStart () const noexcept
	Returns the line's start point. More...

ValueType	getStartX () const noexcept
	Returns the x coordinate of the line's start point. More...

ValueType	getStartY () const noexcept
	Returns the y coordinate of the line's start point. More...

bool	intersects (Line line, Point< ValueType > &intersection) const noexcept
	Finds the intersection between two lines. More...

bool	intersects (Line other) const noexcept
	Returns true if this line intersects another. More...

bool	isHorizontal () const noexcept
	Returns true if the line's start and end y coordinates are the same. More...

bool	isPointAbove (Point< ValueType > point) const noexcept
	Returns true if the given point lies above this line. More...

bool	isVertical () const noexcept
	Returns true if the line's start and end x coordinates are the same. More...

bool	operator!= (Line other) const noexcept
	Compares two lines. More...

Line &	operator= (const Line &)=default
	Copies a line from another one. More...

bool	operator== (Line other) const noexcept
	Compares two lines. More...

Line	reversed () const noexcept
	Returns a line that is the same as this one, but with the start and end reversed,. More...

void	setEnd (ValueType newEndX, ValueType newEndY) noexcept
	Changes this line's end point. More...

void	setEnd (const Point< ValueType > newEnd) noexcept
	Changes this line's end point. More...

void	setStart (ValueType newStartX, ValueType newStartY) noexcept
	Changes this line's start point. More...

void	setStart (const Point< ValueType > newStart) noexcept
	Changes this line's start point. More...

Line< double >	toDouble () const noexcept
	Casts this line to double coordinates. More...

Line< float >	toFloat () const noexcept
	Casts this line to float coordinates. More...

Line	withShortenedEnd (ValueType distanceToShortenBy) const noexcept
	Returns a shortened copy of this line. More...

Line	withShortenedStart (ValueType distanceToShortenBy) const noexcept
	Returns a shortened copy of this line. More...

Static Public Member Functions
static Line	fromStartAndAngle (Point< ValueType > startPoint, ValueType length, ValueType angle) noexcept
	Creates a line from a start point, length and angle. More...

Static Private Member Functions
static bool	findIntersection (const Point< ValueType > p1, const Point< ValueType > p2, const Point< ValueType > p3, const Point< ValueType > p4, Point< ValueType > &intersection) noexcept

static bool	isZeroToOne (ValueType v) noexcept

Private Attributes
Point< ValueType >	end

Point< ValueType >	start

Detailed Description

template<typename ValueType>
class juce::Line< ValueType >

Represents a line.

This class contains a bunch of useful methods for various geometric tasks.

The ValueType template parameter should be a primitive type - float or double are what it's designed for. Integer types will work in a basic way, but some methods that perform mathematical operations may not compile, or they may not produce sensible results.

See also: Point, Rectangle, Path, Graphics::drawLine

{Graphics}

Constructor & Destructor Documentation

◆ Line() [1/4]

template<typename ValueType>

juce::Line< ValueType >::Line ( )

default

Creates a line, using (0, 0) as its start and end points.

◆ Line() [2/4]

template<typename ValueType>

juce::Line< ValueType >::Line ( const Line< ValueType > & )

default

Creates a copy of another line.

◆ Line() [3/4]

template<typename ValueType>

juce::Line< ValueType >::Line	(	ValueType	startX,
		ValueType	startY,
		ValueType	endX,
		ValueType	endY
	)

inlinenoexcept

Creates a line based on the coordinates of its start and end points.

◆ Line() [4/4]

template<typename ValueType>

juce::Line< ValueType >::Line	(	Point< ValueType >	startPoint,
		Point< ValueType >	endPoint
	)

inlinenoexcept

Creates a line from its start and end points.

References juce::Line< ValueType >::operator=(), and juce::Line< ValueType >::~Line().

◆ ~Line()

template<typename ValueType>

juce::Line< ValueType >::~Line ( )

default

Destructor.

Referenced by juce::Line< ValueType >::Line().

Member Function Documentation

◆ applyTransform()

template<typename ValueType>

void juce::Line< ValueType >::applyTransform ( const AffineTransform & transform )

inlinenoexcept

Applies an affine transform to the line's start and end points.

References juce::Line< ValueType >::end, and juce::Line< ValueType >::start.

Referenced by juce::RenderingHelpers::GradientPixelIterators::Linear::Linear().

◆ findIntersection()

template<typename ValueType>

static bool juce::Line< ValueType >::findIntersection	(	const Point< ValueType >	p1,
		const Point< ValueType >	p2,
		const Point< ValueType >	p3,
		const Point< ValueType >	p4,
		Point< ValueType > &	intersection
	)

inlinestaticprivatenoexcept

References juce::Line< ValueType >::isZeroToOne().

Referenced by juce::Line< ValueType >::getIntersection(), and juce::Line< ValueType >::intersects().

◆ findNearestPointTo()

template<typename ValueType>

Point<ValueType> juce::Line< ValueType >::findNearestPointTo ( Point< ValueType > point ) const

inlinenoexcept

Finds the point on this line which is nearest to a given point.

See also: getDistanceFromPoint, findNearestProportionalPositionTo

References juce::Line< ValueType >::findNearestProportionalPositionTo(), and juce::Line< ValueType >::getPointAlongLineProportionally().

◆ findNearestProportionalPositionTo()

template<typename ValueType>

ValueType juce::Line< ValueType >::findNearestProportionalPositionTo ( Point< ValueType > point ) const

inlinenoexcept

Finds the point on this line which is nearest to a given point, and returns its position as a proportional position along the line.

Returns: a value 0 to 1.0 which is the distance along this line from the line's start to the point which is nearest to the point passed-in. To turn this number into a position, use getPointAlongLineProportionally().

See also: getDistanceFromPoint, getPointAlongLineProportionally

References juce::Line< ValueType >::end, juce::jlimit(), and juce::Line< ValueType >::start.

Referenced by juce::Line< ValueType >::findNearestPointTo().

◆ fromStartAndAngle()

template<typename ValueType>

static Line juce::Line< ValueType >::fromStartAndAngle	(	Point< ValueType >	startPoint,
		ValueType	length,
		ValueType	angle
	)

inlinestaticnoexcept

Creates a line from a start point, length and angle.

This angle is the number of radians clockwise from the 12 o'clock direction, where the line's start point is considered to be at the centre.

◆ getAngle()

template<typename ValueType>

Point<ValueType>::FloatType juce::Line< ValueType >::getAngle ( ) const

inlinenoexcept

Returns the line's angle.

This value is the number of radians clockwise from the 12 o'clock direction, where the line's start point is considered to be at the centre.

References juce::Line< ValueType >::end, and juce::Line< ValueType >::start.

◆ getDistanceFromPoint()

template<typename ValueType>

ValueType juce::Line< ValueType >::getDistanceFromPoint	(	Point< ValueType >	targetPoint,
		Point< ValueType > &	pointOnLine
	)		const

inlinenoexcept

Returns the smallest distance between this line segment and a given point.

So if the point is close to the line, this will return the perpendicular distance from the line; if the point is a long way beyond one of the line's end-point's, it'll return the straight-line distance to the nearest end-point.

pointOnLine receives the position of the point that is found.

Returns: the point's distance from the line

See also: getPositionAlongLineOfNearestPoint

References juce::Line< ValueType >::end, and juce::Line< ValueType >::start.

◆ getEnd()

template<typename ValueType>

Point<ValueType> juce::Line< ValueType >::getEnd ( ) const

inlinenoexcept

Returns the line's end point.

References juce::Line< ValueType >::end.

◆ getEndX()

template<typename ValueType>

ValueType juce::Line< ValueType >::getEndX ( ) const

inlinenoexcept

Returns the x coordinate of the line's end point.

References juce::Line< ValueType >::end.

◆ getEndY()

template<typename ValueType>

ValueType juce::Line< ValueType >::getEndY ( ) const

inlinenoexcept

Returns the y coordinate of the line's end point.

References juce::Line< ValueType >::end.

◆ getIntersection()

template<typename ValueType>

Point<ValueType> juce::Line< ValueType >::getIntersection ( Line< ValueType > line ) const

inlinenoexcept

Finds the intersection between two lines.

Parameters

line	the line to intersect with

Returns: the point at which the lines intersect, even if this lies beyond the end of the lines

References juce::Line< ValueType >::end, juce::Line< ValueType >::findIntersection(), and juce::Line< ValueType >::start.

◆ getLength()

template<typename ValueType>

ValueType juce::Line< ValueType >::getLength ( ) const

inlinenoexcept

Returns the length of the line.

References juce::Line< ValueType >::end, and juce::Line< ValueType >::start.

Referenced by juce::Line< ValueType >::getPointAlongLine(), juce::Line< ValueType >::withShortenedEnd(), and juce::Line< ValueType >::withShortenedStart().

◆ getLengthSquared()

template<typename ValueType>

ValueType juce::Line< ValueType >::getLengthSquared ( ) const

inlinenoexcept

Returns the length of the line.

References juce::Line< ValueType >::end, and juce::Line< ValueType >::start.

◆ getPointAlongLine() [1/2]

template<typename ValueType>

Point<ValueType> juce::Line< ValueType >::getPointAlongLine ( ValueType distanceFromStart ) const

inlinenoexcept

Returns the location of the point which is a given distance along this line.

Parameters

distanceFromStart the distance to move along the line from its start point. This value can be negative or longer than the line itself

See also: getPointAlongLineProportionally

References juce::Line< ValueType >::end, juce::Line< ValueType >::getLength(), and juce::Line< ValueType >::start.

Referenced by juce::Line< ValueType >::withShortenedEnd(), and juce::Line< ValueType >::withShortenedStart().

◆ getPointAlongLine() [2/2]

template<typename ValueType>

Point<ValueType> juce::Line< ValueType >::getPointAlongLine	(	ValueType	distanceFromStart,
		ValueType	perpendicularDistance
	)		const

inlinenoexcept

Returns a point which is a certain distance along and to the side of this line.

This effectively moves a given distance along the line, then another distance perpendicularly to this, and returns the resulting position.

Parameters

distanceFromStart	the distance to move along the line from its start point. This value can be negative or longer than the line itself
perpendicularDistance	how far to move sideways from the line. If you're looking along the line from its start towards its end, then a positive value here will move to the right, negative value move to the left.

References juce::Line< ValueType >::end, juce::juce_hypot(), and juce::Line< ValueType >::start.

◆ getPointAlongLineProportionally()

template<typename ValueType>

Point<ValueType> juce::Line< ValueType >::getPointAlongLineProportionally ( typename Point< ValueType >::FloatType proportionOfLength ) const

inlinenoexcept

Returns the location of the point which is a given distance along this line proportional to the line's length.

Parameters

proportionOfLength the distance to move along the line from its start point, in multiples of the line's length. So a value of 0.0 will return the line's start point and a value of 1.0 will return its end point. (This value can be negative or greater than 1.0).

See also: getPointAlongLine

References juce::Line< ValueType >::end, and juce::Line< ValueType >::start.

Referenced by juce::Line< ValueType >::findNearestPointTo().

◆ getStart()

template<typename ValueType>

Point<ValueType> juce::Line< ValueType >::getStart ( ) const

inlinenoexcept

Returns the line's start point.

References juce::Line< ValueType >::start.

◆ getStartX()

template<typename ValueType>

ValueType juce::Line< ValueType >::getStartX ( ) const

inlinenoexcept

Returns the x coordinate of the line's start point.

References juce::Line< ValueType >::start.

◆ getStartY()

template<typename ValueType>

ValueType juce::Line< ValueType >::getStartY ( ) const

inlinenoexcept

Returns the y coordinate of the line's start point.

References juce::Line< ValueType >::start.

◆ intersects() [1/2]

template<typename ValueType>

bool juce::Line< ValueType >::intersects	(	Line< ValueType >	line,
		Point< ValueType > &	intersection
	)		const

inlinenoexcept

Finds the intersection between two lines.

Parameters

line	the other line
intersection	the position of the point where the lines meet (or where they would meet if they were infinitely long) the intersection (if the lines intersect). If the lines are parallel, this will just be set to the position of one of the line's endpoints.

Returns: true if the line segments intersect; false if they don't. Even if they don't intersect, the intersection coordinates returned will still be valid

References juce::Line< ValueType >::end, juce::Line< ValueType >::findIntersection(), and juce::Line< ValueType >::start.

◆ intersects() [2/2]

template<typename ValueType>

bool juce::Line< ValueType >::intersects ( Line< ValueType > other ) const

inlinenoexcept

Returns true if this line intersects another.

References juce::Line< ValueType >::end, juce::Line< ValueType >::findIntersection(), and juce::Line< ValueType >::start.

◆ isHorizontal()

template<typename ValueType>

bool juce::Line< ValueType >::isHorizontal ( ) const

inlinenoexcept

Returns true if the line's start and end y coordinates are the same.

References juce::Line< ValueType >::end, and juce::Line< ValueType >::start.

◆ isPointAbove()

template<typename ValueType>

bool juce::Line< ValueType >::isPointAbove ( Point< ValueType > point ) const

inlinenoexcept

Returns true if the given point lies above this line.

The return value is true if the point's y coordinate is less than the y coordinate of this line at the given x (assuming the line extends infinitely in both directions).

References juce::Line< ValueType >::end, and juce::Line< ValueType >::start.

◆ isVertical()

template<typename ValueType>

bool juce::Line< ValueType >::isVertical ( ) const

inlinenoexcept

Returns true if the line's start and end x coordinates are the same.

References juce::Line< ValueType >::end, and juce::Line< ValueType >::start.

◆ isZeroToOne()

template<typename ValueType>

static bool juce::Line< ValueType >::isZeroToOne ( ValueType v )

inlinestaticprivatenoexcept

Referenced by juce::Line< ValueType >::findIntersection().

◆ operator!=()

template<typename ValueType>

bool juce::Line< ValueType >::operator!= ( Line< ValueType > other ) const

inlinenoexcept

Compares two lines.

References juce::Line< ValueType >::end, and juce::Line< ValueType >::start.

◆ operator=()

template<typename ValueType>

Line& juce::Line< ValueType >::operator= ( const Line< ValueType > & )

default

Copies a line from another one.

Referenced by juce::Line< ValueType >::Line().

◆ operator==()

template<typename ValueType>

bool juce::Line< ValueType >::operator== ( Line< ValueType > other ) const

inlinenoexcept

Compares two lines.

References juce::Line< ValueType >::end, and juce::Line< ValueType >::start.

◆ reversed()

template<typename ValueType>

Line juce::Line< ValueType >::reversed ( ) const

inlinenoexcept

Returns a line that is the same as this one, but with the start and end reversed,.

References juce::Line< ValueType >::end, and juce::Line< ValueType >::start.

◆ setEnd() [1/2]

template<typename ValueType>

void juce::Line< ValueType >::setEnd	(	ValueType	newEndX,
		ValueType	newEndY
	)

inlinenoexcept

Changes this line's end point.

References juce::Line< ValueType >::end.

◆ setEnd() [2/2]

template<typename ValueType>

void juce::Line< ValueType >::setEnd ( const Point< ValueType > newEnd )

inlinenoexcept

Changes this line's end point.

References juce::Line< ValueType >::end.

◆ setStart() [1/2]

template<typename ValueType>

void juce::Line< ValueType >::setStart	(	ValueType	newStartX,
		ValueType	newStartY
	)

inlinenoexcept

Changes this line's start point.

References juce::Line< ValueType >::start.

◆ setStart() [2/2]

template<typename ValueType>

void juce::Line< ValueType >::setStart ( const Point< ValueType > newStart )

inlinenoexcept

Changes this line's start point.

References juce::Line< ValueType >::start.

◆ toDouble()

template<typename ValueType>

Line<double> juce::Line< ValueType >::toDouble ( ) const

inlinenoexcept

Casts this line to double coordinates.

References juce::Line< ValueType >::end, and juce::Line< ValueType >::start.

◆ toFloat()

template<typename ValueType>

Line<float> juce::Line< ValueType >::toFloat ( ) const

inlinenoexcept

Casts this line to float coordinates.

References juce::Line< ValueType >::end, and juce::Line< ValueType >::start.

◆ withShortenedEnd()

template<typename ValueType>

Line juce::Line< ValueType >::withShortenedEnd ( ValueType distanceToShortenBy ) const

inlinenoexcept

Returns a shortened copy of this line.

This will chop off part of the end of this line by a certain amount, (leaving the start-point the same), and return the new line.

References juce::Line< ValueType >::getLength(), juce::Line< ValueType >::getPointAlongLine(), juce::jmin(), and juce::Line< ValueType >::start.

◆ withShortenedStart()

template<typename ValueType>

Line juce::Line< ValueType >::withShortenedStart ( ValueType distanceToShortenBy ) const

inlinenoexcept

Returns a shortened copy of this line.

This will chop off part of the start of this line by a certain amount, (leaving the end-point the same), and return the new line.

References juce::Line< ValueType >::end, juce::Line< ValueType >::getLength(), juce::Line< ValueType >::getPointAlongLine(), and juce::jmin().

Member Data Documentation

◆ end

template<typename ValueType>

Point<ValueType> juce::Line< ValueType >::end

private

◆ start

template<typename ValueType>

Point<ValueType> juce::Line< ValueType >::start

private

The documentation for this class was generated from the following file:

juce_Line.h

Public Member Functions

Static Public Member Functions

Static Private Member Functions

Private Attributes

Detailed Description

template<typename ValueType> class juce::Line< ValueType >

Constructor & Destructor Documentation

◆ Line() [1/4]

◆ Line() [2/4]

◆ Line() [3/4]

◆ Line() [4/4]

◆ ~Line()

Member Function Documentation

◆ applyTransform()

◆ findIntersection()

◆ findNearestPointTo()

◆ findNearestProportionalPositionTo()

◆ fromStartAndAngle()

◆ getAngle()

◆ getDistanceFromPoint()

◆ getEnd()

◆ getEndX()

◆ getEndY()

◆ getIntersection()

◆ getLength()

◆ getLengthSquared()

◆ getPointAlongLine() [1/2]

◆ getPointAlongLine() [2/2]

◆ getPointAlongLineProportionally()

◆ getStart()

◆ getStartX()

◆ getStartY()

◆ intersects() [1/2]

◆ intersects() [2/2]

◆ isHorizontal()

◆ isPointAbove()

◆ isVertical()

◆ isZeroToOne()

◆ operator!=()

◆ operator=()

◆ operator==()

◆ reversed()

◆ setEnd() [1/2]

◆ setEnd() [2/2]

◆ setStart() [1/2]

◆ setStart() [2/2]

◆ toDouble()

◆ toFloat()

◆ withShortenedEnd()

◆ withShortenedStart()

Member Data Documentation

◆ end

◆ start

template<typename ValueType>
class juce::Line< ValueType >