This abstract base class is used by some AudioProcessorParameter helper classes. More...

#include <juce_AudioProcessorParameterWithID.h>

Inheritance diagram for juce::AudioProcessorParameterWithID:

[legend]

Collaboration diagram for juce::AudioProcessorParameterWithID:

[legend]

Public Types
enum	Category { genericParameter = (0 << 16) \| 0, inputGain = (1 << 16) \| 0, outputGain = (1 << 16) \| 1, inputMeter = (2 << 16) \| 0, outputMeter = (2 << 16) \| 1, compressorLimiterGainReductionMeter = (2 << 16) \| 2, expanderGateGainReductionMeter = (2 << 16) \| 3, analysisMeter = (2 << 16) \| 4, otherMeter = (2 << 16) \| 5 }

Public Member Functions
	AudioProcessorParameterWithID (const String &parameterID, const String &name, const String &label=String(), Category category=AudioProcessorParameter::genericParameter)
	The creation of this object requires providing a name and ID which will be constant for its lifetime. More...

	~AudioProcessorParameterWithID () override
	Destructor. More...

void	addListener (Listener *newListener)
	Registers a listener to receive events when the parameter's state changes. More...

void	beginChangeGesture ()
	Sends a signal to the host to tell it that the user is about to start changing this parameter. More...

void	endChangeGesture ()
	Tells the host that the user has finished changing this parameter. More...

virtual StringArray	getAllValueStrings () const
	Returns the set of strings which represent the possible states a parameter can be in. More...

virtual String	getCurrentValueAsText () const
	Returns the current value of the parameter as a String. More...

virtual float	getDefaultValue () const =0
	This should return the default value for this parameter. More...

virtual int	getNumSteps () const
	Returns the number of steps that this parameter's range should be quantised into. More...

int	getParameterIndex () const noexcept
	Returns the index of this parameter in its parent processor's parameter list. More...

virtual String	getText (float normalisedValue, int) const
	Returns a textual version of the supplied normalised parameter value. More...

virtual float	getValue () const =0
	Called by the host to find out the value of this parameter. More...

virtual float	getValueForText (const String &text) const =0
	Should parse a string and return the appropriate value for it. More...

virtual bool	isAutomatable () const
	Returns true if the host can automate this parameter. More...

virtual bool	isBoolean () const
	Returns whether the parameter represents a boolean switch, typically with "On" and "Off" states. More...

virtual bool	isDiscrete () const
	Returns whether the parameter uses discrete values, based on the result of getNumSteps, or allows the host to select values continuously. More...

virtual bool	isMetaParameter () const
	Should return true if this parameter is a "meta" parameter. More...

virtual bool	isOrientationInverted () const
	This can be overridden to tell the host that this parameter operates in the reverse direction. More...

void	removeListener (Listener *listener)
	Removes a previously registered parameter listener. More...

void	sendValueChangedMessageToListeners (float newValue)

virtual void	setValue (float newValue)=0
	The host will call this method to change the value of a parameter. More...

void	setValueNotifyingHost (float newValue)
	A processor should call this when it needs to change one of its parameters. More...

Public Attributes
const Category	category
	Provides access to the parameter's category. More...

const String	label
	Provides access to the parameter's label. More...

const String	name
	Provides access to the parameter's name. More...

const String	paramID
	Provides access to the parameter's ID string. More...

Private Member Functions
Category	getCategory () const override
	Returns the parameter's category. More...

String	getLabel () const override
	Some parameters may be able to return a label string for their units. More...

String	getName (int) const override
	Returns the name to display for this parameter, which should be made to fit within the given string length. More...

Detailed Description

This abstract base class is used by some AudioProcessorParameter helper classes.

See also: AudioParameterFloat, AudioParameterInt, AudioParameterBool, AudioParameterChoice

{Audio}

Member Enumeration Documentation

◆ Category

enum juce::AudioProcessorParameter::Category

inherited

Enumerator
genericParameter
inputGain	If your parameter is not a meter then you should use this category.
outputGain	Currently not used.
inputMeter	The following categories tell the host that this parameter is a meter level value and therefore read-only. Most hosts will display these type of parameters as a meter in the generic view of your plug-in. Pro-Tools will also show the meter in the mixer view.
outputMeter
compressorLimiterGainReductionMeter
expanderGateGainReductionMeter
analysisMeter
otherMeter

Constructor & Destructor Documentation

◆ AudioProcessorParameterWithID()

juce::AudioProcessorParameterWithID::AudioProcessorParameterWithID	(	const String &	parameterID,
		const String &	name,
		const String &	label = `String()`,
		Category	category = `AudioProcessorParameter::genericParameter`
	)

The creation of this object requires providing a name and ID which will be constant for its lifetime.

◆ ~AudioProcessorParameterWithID()

juce::AudioProcessorParameterWithID::~AudioProcessorParameterWithID ( )

override

Destructor.

Member Function Documentation

◆ addListener()

void juce::AudioProcessorParameter::addListener ( Listener * newListener )

inherited

Registers a listener to receive events when the parameter's state changes.

If the listener is already registered, this will not register it again.

See also: removeListener

◆ beginChangeGesture()

void juce::AudioProcessorParameter::beginChangeGesture ( )

inherited

Sends a signal to the host to tell it that the user is about to start changing this parameter.

This allows the host to know when a parameter is actively being held by the user, and it may use this information to help it record automation. If you call this, it must be matched by a later call to endChangeGesture().

◆ endChangeGesture()

void juce::AudioProcessorParameter::endChangeGesture ( )

inherited

Tells the host that the user has finished changing this parameter.

This allows the host to know when a parameter is actively being held by the user, and it may use this information to help it record automation. A call to this method must follow a call to beginChangeGesture().

◆ getAllValueStrings()

virtual StringArray juce::AudioProcessorParameter::getAllValueStrings ( ) const

virtualinherited

Returns the set of strings which represent the possible states a parameter can be in.

If you are hosting a plug-in you can use the result of this function to populate a ComboBox listing the allowed values.

If you are implementing a plug-in then you do not need to override this.

◆ getCategory()

Category juce::AudioProcessorParameterWithID::getCategory ( ) const

overrideprivatevirtual

Returns the parameter's category.

Reimplemented from juce::AudioProcessorParameter.

◆ getCurrentValueAsText()

virtual String juce::AudioProcessorParameter::getCurrentValueAsText ( ) const

virtualinherited

Returns the current value of the parameter as a String.

This function can be called when you are hosting plug-ins to get a more specialsed textual represenation of the current value from the plug-in, for example "On" rather than "1.0".

If you are implementing a plug-in then you should ignore this function and instead override getText.

◆ getDefaultValue()

virtual float juce::AudioProcessorParameter::getDefaultValue ( ) const

pure virtualinherited

This should return the default value for this parameter.

Implemented in juce::AudioProcessorValueTreeState::Parameter, juce::AudioParameterFloat, juce::AudioParameterChoice, juce::AudioParameterInt, and juce::AudioParameterBool.

◆ getLabel()

String juce::AudioProcessorParameterWithID::getLabel ( ) const

overrideprivatevirtual

Some parameters may be able to return a label string for their units.

For example "Hz" or "%".

Implements juce::AudioProcessorParameter.

◆ getName()

String juce::AudioProcessorParameterWithID::getName ( int maximumStringLength ) const

overrideprivatevirtual

Returns the name to display for this parameter, which should be made to fit within the given string length.

Implements juce::AudioProcessorParameter.

◆ getNumSteps()

virtual int juce::AudioProcessorParameter::getNumSteps ( ) const

virtualinherited

Returns the number of steps that this parameter's range should be quantised into.

If you want a continuous range of values, don't override this method, and allow the default implementation to return AudioProcessor::getDefaultNumParameterSteps().

If your parameter is boolean, then you may want to make this return 2.

The value that is returned may or may not be used, depending on the host. If you want the host to display stepped automation values, rather than a continuous interpolation between successive values, you should override isDiscrete to return true.

See also: isDiscrete

Reimplemented in juce::AudioProcessorValueTreeState::Parameter, juce::AudioParameterFloat, juce::AudioParameterChoice, juce::AudioParameterInt, juce::AudioParameterBool, and juce::RangedAudioParameter.

◆ getParameterIndex()

int juce::AudioProcessorParameter::getParameterIndex ( ) const

inlinenoexceptinherited

Returns the index of this parameter in its parent processor's parameter list.

◆ getText()

virtual String juce::AudioProcessorParameter::getText	(	float	normalisedValue,
		int
	)		const

virtualinherited

Returns a textual version of the supplied normalised parameter value.

The default implementation just returns the floating point value as a string, but this could do anything you need for a custom type of value.

Reimplemented in juce::AudioPluginInstance::Parameter, juce::AudioParameterFloat, juce::AudioParameterChoice, juce::AudioParameterInt, and juce::AudioParameterBool.

◆ getValue()

virtual float juce::AudioProcessorParameter::getValue ( ) const

pure virtualinherited

Called by the host to find out the value of this parameter.

Hosts will expect the value returned to be between 0 and 1.0.

This could be called quite frequently, so try to make your code efficient. It's also likely to be called by non-UI threads, so the code in here should be thread-aware.

Implemented in juce::AudioParameterFloat, juce::AudioParameterChoice, juce::AudioParameterInt, and juce::AudioParameterBool.

◆ getValueForText()

virtual float juce::AudioProcessorParameter::getValueForText ( const String & text ) const

pure virtualinherited

Should parse a string and return the appropriate value for it.

Implemented in juce::AudioPluginInstance::Parameter, juce::AudioParameterFloat, juce::AudioParameterChoice, juce::AudioParameterInt, and juce::AudioParameterBool.

◆ isAutomatable()

virtual bool juce::AudioProcessorParameter::isAutomatable ( ) const

virtualinherited

Returns true if the host can automate this parameter.

By default, this returns true.

Reimplemented in juce::AudioProcessorValueTreeState::Parameter.

◆ isBoolean()

virtual bool juce::AudioProcessorParameter::isBoolean ( ) const

virtualinherited

Returns whether the parameter represents a boolean switch, typically with "On" and "Off" states.

This information may or may not be used, depending on the host. If you want the host to display a switch, rather than a two item dropdown menu, override this method to return true. You also need to override isDiscrete() to return true and getNumSteps() to return 2.

See also: isDiscrete getNumSteps

Reimplemented in juce::AudioProcessorValueTreeState::Parameter, and juce::AudioParameterBool.

◆ isDiscrete()

virtual bool juce::AudioProcessorParameter::isDiscrete ( ) const

virtualinherited

Returns whether the parameter uses discrete values, based on the result of getNumSteps, or allows the host to select values continuously.

This information may or may not be used, depending on the host. If you want the host to display stepped automation values, rather than a continuous interpolation between successive values, override this method to return true.

See also: getNumSteps

Reimplemented in juce::AudioProcessorValueTreeState::Parameter, juce::AudioParameterChoice, and juce::AudioParameterBool.

◆ isMetaParameter()

virtual bool juce::AudioProcessorParameter::isMetaParameter ( ) const

virtualinherited

Should return true if this parameter is a "meta" parameter.

A meta-parameter is a parameter that changes other params. It is used by some hosts (e.g. AudioUnit hosts). By default this returns false.

Reimplemented in juce::AudioProcessorValueTreeState::Parameter.

◆ isOrientationInverted()

virtual bool juce::AudioProcessorParameter::isOrientationInverted ( ) const

virtualinherited

This can be overridden to tell the host that this parameter operates in the reverse direction.

(Not all plugin formats or hosts will actually use this information).

◆ removeListener()

void juce::AudioProcessorParameter::removeListener ( Listener * listener )

inherited

Removes a previously registered parameter listener.

See also: addListener

◆ sendValueChangedMessageToListeners()

void juce::AudioProcessorParameter::sendValueChangedMessageToListeners ( float newValue )

inherited

◆ setValue()

virtual void juce::AudioProcessorParameter::setValue ( float newValue )

pure virtualinherited

The host will call this method to change the value of a parameter.

The host may call this at any time, including during the audio processing callback, so your implementation has to process this very efficiently and avoid any kind of locking.

If you want to set the value of a parameter internally, e.g. from your editor component, then don't call this directly - instead, use the setValueNotifyingHost() method, which will also send a message to the host telling it about the change. If the message isn't sent, the host won't be able to automate your parameters properly.

The value passed will be between 0 and 1.0.

Implemented in juce::AudioParameterFloat, juce::AudioParameterChoice, juce::AudioParameterInt, and juce::AudioParameterBool.

◆ setValueNotifyingHost()

void juce::AudioProcessorParameter::setValueNotifyingHost ( float newValue )

inherited

A processor should call this when it needs to change one of its parameters.

This could happen when the editor or some other internal operation changes a parameter. This method will call the setValue() method to change the value, and will then send a message to the host telling it about the change.

Note that to make sure the host correctly handles automation, you should call the beginChangeGesture() and endChangeGesture() methods to tell the host when the user has started and stopped changing the parameter.

Member Data Documentation

◆ category

const Category juce::AudioProcessorParameterWithID::category

Provides access to the parameter's category.

◆ label

const String juce::AudioProcessorParameterWithID::label

Provides access to the parameter's label.

◆ name

const String juce::AudioProcessorParameterWithID::name

Provides access to the parameter's name.

◆ paramID

const String juce::AudioProcessorParameterWithID::paramID

Provides access to the parameter's ID string.

The documentation for this class was generated from the following file:

juce_AudioProcessorParameterWithID.h

Public Types

Public Member Functions

Public Attributes

Private Member Functions

Detailed Description

Member Enumeration Documentation

◆ Category

Constructor & Destructor Documentation

◆ AudioProcessorParameterWithID()

◆ ~AudioProcessorParameterWithID()

Member Function Documentation

◆ addListener()

◆ beginChangeGesture()

◆ endChangeGesture()

◆ getAllValueStrings()

◆ getCategory()

◆ getCurrentValueAsText()

◆ getDefaultValue()

◆ getLabel()

◆ getName()

◆ getNumSteps()

◆ getParameterIndex()

◆ getText()

◆ getValue()

◆ getValueForText()

◆ isAutomatable()

◆ isBoolean()

◆ isDiscrete()

◆ isMetaParameter()

◆ isOrientationInverted()

◆ removeListener()

◆ sendValueChangedMessageToListeners()

◆ setValue()

◆ setValueNotifyingHost()

Member Data Documentation

◆ category

◆ label

◆ name

◆ paramID