Reads and writes the Ogg-Vorbis audio format. More...

#include <juce_OggVorbisAudioFormat.h>

Inheritance diagram for OggVorbisAudioFormat:

Collaboration diagram for OggVorbisAudioFormat:

[legend]

Public Member Functions
	OggVorbisAudioFormat ()

	~OggVorbisAudioFormat ()

bool	canDoMono () override
	Returns true if the format can do 1-channel audio. More...

bool	canDoStereo () override
	Returns true if the format can do 2-channel audio. More...

virtual bool	canHandleFile (const File &fileToTest)
	Returns true if this the given file can be read by this format. More...

virtual MemoryMappedAudioFormatReader *	createMemoryMappedReader (const File &file)
	Attempts to create a MemoryMappedAudioFormatReader, if possible for this format. More...

virtual MemoryMappedAudioFormatReader *	createMemoryMappedReader (FileInputStream *fin)

AudioFormatReader *	createReaderFor (InputStream *sourceStream, bool deleteStreamIfOpeningFails) override
	Tries to create an object that can read from a stream containing audio data in this format. More...

AudioFormatWriter *	createWriterFor (OutputStream *streamToWriteTo, double sampleRateToUse, unsigned int numberOfChannels, int bitsPerSample, const StringPairArray &metadataValues, int qualityOptionIndex) override
	Tries to create an object that can write to a stream with this audio format. More...

virtual AudioFormatWriter *	createWriterFor (OutputStream *streamToWriteTo, double sampleRateToUse, const AudioChannelSet &channelLayout, int bitsPerSample, const StringPairArray &metadataValues, int qualityOptionIndex)
	Tries to create an object that can write to a stream with this audio format. More...

int	estimateOggFileQuality (const File &source)
	Tries to estimate the quality level of an ogg file based on its size. More...

const StringArray &	getFileExtensions () const
	Returns all the file extensions that might apply to a file of this format. More...

const String &	getFormatName () const
	Returns the name of this format. More...

Array< int >	getPossibleBitDepths () override
	Returns a set of bit depths that the format can read and write. More...

Array< int >	getPossibleSampleRates () override
	Returns a set of sample rates that the format can read and write. More...

StringArray	getQualityOptions () override
	Returns a list of different qualities that can be used when writing. More...

virtual bool	isChannelLayoutSupported (const AudioChannelSet &channelSet)
	Returns true if the channel layout is supported by this format. More...

bool	isCompressed () override
	Returns true if the format uses compressed data. More...

Static Public Attributes
static const char *const	encoderName
	Metadata property name used by the Ogg writer - if you set a string for this value, it will be written into the ogg file as the name of the encoder app. More...

static const char *const	id3album
	Metadata key for setting an ID3 album. More...

static const char *const	id3artist
	Metadata key for setting an ID3 artist name. More...

static const char *const	id3comment
	Metadata key for setting an ID3 comment. More...

static const char *const	id3date
	Metadata key for setting an ID3 date. More...

static const char *const	id3genre
	Metadata key for setting an ID3 genre. More...

static const char *const	id3title
	Metadata key for setting an ID3 title. More...

static const char *const	id3trackNumber
	Metadata key for setting an ID3 track number. More...

Detailed Description

Reads and writes the Ogg-Vorbis audio format.

To compile this, you'll need to set the JUCE_USE_OGGVORBIS flag.

See also: AudioFormat,

Constructor & Destructor Documentation

◆ OggVorbisAudioFormat()

OggVorbisAudioFormat::OggVorbisAudioFormat ( )

◆ ~OggVorbisAudioFormat()

OggVorbisAudioFormat::~OggVorbisAudioFormat ( )

Member Function Documentation

◆ canDoMono()

bool OggVorbisAudioFormat::canDoMono ( )

overridevirtual

Returns true if the format can do 1-channel audio.

Implements AudioFormat.

◆ canDoStereo()

bool OggVorbisAudioFormat::canDoStereo ( )

overridevirtual

Returns true if the format can do 2-channel audio.

Implements AudioFormat.

◆ canHandleFile()

virtual bool AudioFormat::canHandleFile ( const File & fileToTest )

virtualinherited

Returns true if this the given file can be read by this format.

Subclasses shouldn't do too much work here, just check the extension or file type. The base class implementation just checks the file's extension against one of the ones that was registered in the constructor.

Reimplemented in AiffAudioFormat, and LAMEEncoderAudioFormat.

◆ createMemoryMappedReader() [1/2]

virtual MemoryMappedAudioFormatReader* AudioFormat::createMemoryMappedReader ( const File & file )

virtualinherited

Attempts to create a MemoryMappedAudioFormatReader, if possible for this format.

If the format does not support this, the method will return nullptr;

Reimplemented in WavAudioFormat, and AiffAudioFormat.

◆ createMemoryMappedReader() [2/2]

virtual MemoryMappedAudioFormatReader* AudioFormat::createMemoryMappedReader ( FileInputStream * fin )

virtualinherited

Reimplemented in WavAudioFormat, and AiffAudioFormat.

◆ createReaderFor()

AudioFormatReader* OggVorbisAudioFormat::createReaderFor	(	InputStream *	sourceStream,
		bool	deleteStreamIfOpeningFails
	)

overridevirtual

Tries to create an object that can read from a stream containing audio data in this format.

The reader object that is returned can be used to read from the stream, and should then be deleted by the caller.

Parameters

sourceStream	the stream to read from - the AudioFormatReader object that is returned will delete this stream when it no longer needs it.
deleteStreamIfOpeningFails	if no reader can be created, this determines whether this method should delete the stream object that was passed-in. (If a valid reader is returned, it will always be in charge of deleting the stream, so this parameter is ignored)

See also: AudioFormatReader

Implements AudioFormat.

◆ createWriterFor() [1/2]

AudioFormatWriter* OggVorbisAudioFormat::createWriterFor	(	OutputStream *	streamToWriteTo,
		double	sampleRateToUse,
		unsigned int	numberOfChannels,
		int	bitsPerSample,
		const StringPairArray &	metadataValues,
		int	qualityOptionIndex
	)

overridevirtual

Tries to create an object that can write to a stream with this audio format.

The writer object that is returned can be used to write to the stream, and should then be deleted by the caller.

If the stream can't be created for some reason (e.g. the parameters passed in here aren't suitable), this will return nullptr.

Parameters

streamToWriteTo	the stream that the data will go to - this will be deleted by the AudioFormatWriter object when it's no longer needed. If no AudioFormatWriter can be created by this method, the stream will NOT be deleted, so that the caller can re-use it to try to open a different format, etc
sampleRateToUse	the sample rate for the file, which must be one of the ones returned by getPossibleSampleRates()
numberOfChannels	the number of channels - this must be either 1 or 2, and the choice will depend on the results of canDoMono() and canDoStereo()
bitsPerSample	the bits per sample to use - this must be one of the values returned by getPossibleBitDepths()
metadataValues	a set of metadata values that the writer should try to write to the stream. Exactly what these are depends on the format, and the subclass doesn't actually have to do anything with them if it doesn't want to. Have a look at the specific format implementation classes to see possible values that can be used
qualityOptionIndex	the index of one of compression qualities returned by the getQualityOptions() method. If there aren't any quality options for this format, just pass 0 in this parameter, as it'll be ignored

See also: AudioFormatWriter

Implements AudioFormat.

◆ createWriterFor() [2/2]

virtual AudioFormatWriter* AudioFormat::createWriterFor	(	OutputStream *	streamToWriteTo,
		double	sampleRateToUse,
		const AudioChannelSet &	channelLayout,
		int	bitsPerSample,
		const StringPairArray &	metadataValues,
		int	qualityOptionIndex
	)

virtualinherited

Tries to create an object that can write to a stream with this audio format.

The writer object that is returned can be used to write to the stream, and should then be deleted by the caller.

If the stream can't be created for some reason (e.g. the parameters passed in here aren't suitable), this will return nullptr.

Parameters

streamToWriteTo	the stream that the data will go to - this will be deleted by the AudioFormatWriter object when it's no longer needed. If no AudioFormatWriter can be created by this method, the stream will NOT be deleted, so that the caller can re-use it to try to open a different format, etc
sampleRateToUse	the sample rate for the file, which must be one of the ones returned by getPossibleSampleRates()
channelLayout	the channel layout for the file. Use isChannelLayoutSupported to check if the writer supports this layout.
bitsPerSample	the bits per sample to use - this must be one of the values returned by getPossibleBitDepths()
metadataValues	a set of metadata values that the writer should try to write to the stream. Exactly what these are depends on the format, and the subclass doesn't actually have to do anything with them if it doesn't want to. Have a look at the specific format implementation classes to see possible values that can be used
qualityOptionIndex	the index of one of compression qualities returned by the getQualityOptions() method. If there aren't any quality options for this format, just pass 0 in this parameter, as it'll be ignored

See also: AudioFormatWriter

Reimplemented in WavAudioFormat.

◆ estimateOggFileQuality()

int OggVorbisAudioFormat::estimateOggFileQuality ( const File & source )

Tries to estimate the quality level of an ogg file based on its size.

If it can't read the file for some reason, this will just return 1 (medium quality), otherwise it will return the approximate quality setting that would have been used to create the file.

See also: getQualityOptions

◆ getFileExtensions()

const StringArray& AudioFormat::getFileExtensions ( ) const

inherited

Returns all the file extensions that might apply to a file of this format.

The first item will be the one that's preferred when creating a new file.

So for a wav file this might just return ".wav"; for an AIFF file it might return two items, ".aif" and ".aiff"

◆ getFormatName()

const String& AudioFormat::getFormatName ( ) const

inherited

Returns the name of this format.

e.g. "WAV file" or "AIFF file"

◆ getPossibleBitDepths()

Array<int> OggVorbisAudioFormat::getPossibleBitDepths ( )

overridevirtual

Returns a set of bit depths that the format can read and write.

Implements AudioFormat.

◆ getPossibleSampleRates()

Array<int> OggVorbisAudioFormat::getPossibleSampleRates ( )

overridevirtual

Returns a set of sample rates that the format can read and write.

Implements AudioFormat.

◆ getQualityOptions()

StringArray OggVorbisAudioFormat::getQualityOptions ( )

overridevirtual

Returns a list of different qualities that can be used when writing.

Non-compressed formats will just return an empty array, but for something like Ogg-Vorbis or MP3, it might return a list of bit-rates, etc.

When calling createWriterFor(), an index from this array is passed in to tell the format which option is required.

Reimplemented from AudioFormat.

◆ isChannelLayoutSupported()

virtual bool AudioFormat::isChannelLayoutSupported ( const AudioChannelSet & channelSet )

virtualinherited

Returns true if the channel layout is supported by this format.

Reimplemented in WavAudioFormat.

◆ isCompressed()

bool OggVorbisAudioFormat::isCompressed ( )

overridevirtual

Returns true if the format uses compressed data.

Reimplemented from AudioFormat.

Member Data Documentation

◆ encoderName

const char* const OggVorbisAudioFormat::encoderName

static

Metadata property name used by the Ogg writer - if you set a string for this value, it will be written into the ogg file as the name of the encoder app.

See also: createWriterFor

◆ id3album

const char* const OggVorbisAudioFormat::id3album

static

Metadata key for setting an ID3 album.

◆ id3artist

const char* const OggVorbisAudioFormat::id3artist

static

Metadata key for setting an ID3 artist name.

◆ id3comment

const char* const OggVorbisAudioFormat::id3comment

static

Metadata key for setting an ID3 comment.

◆ id3date

const char* const OggVorbisAudioFormat::id3date

static

Metadata key for setting an ID3 date.

◆ id3genre

const char* const OggVorbisAudioFormat::id3genre

static

Metadata key for setting an ID3 genre.

◆ id3title

const char* const OggVorbisAudioFormat::id3title

static

Metadata key for setting an ID3 title.

◆ id3trackNumber

const char* const OggVorbisAudioFormat::id3trackNumber

static

Metadata key for setting an ID3 track number.

The documentation for this class was generated from the following file:

juce_OggVorbisAudioFormat.h

Public Member Functions

Static Public Attributes

Detailed Description

Constructor & Destructor Documentation

◆ OggVorbisAudioFormat()

◆ ~OggVorbisAudioFormat()

Member Function Documentation

◆ canDoMono()

◆ canDoStereo()

◆ canHandleFile()

◆ createMemoryMappedReader() [1/2]

◆ createMemoryMappedReader() [2/2]

◆ createReaderFor()

◆ createWriterFor() [1/2]

◆ createWriterFor() [2/2]

◆ estimateOggFileQuality()

◆ getFileExtensions()

◆ getFormatName()

◆ getPossibleBitDepths()

◆ getPossibleSampleRates()

◆ getQualityOptions()

◆ isChannelLayoutSupported()

◆ isCompressed()

Member Data Documentation

◆ encoderName

◆ id3album

◆ id3artist

◆ id3comment

◆ id3date

◆ id3genre

◆ id3title

◆ id3trackNumber