A special type of AudioProcessor that can live inside an AudioProcessorGraph in order to use the audio that comes into and out of the graph itself. More...

#include <juce_AudioProcessorGraph.h>

Inheritance diagram for AudioProcessorGraph::AudioGraphIOProcessor:

[legend]

Collaboration diagram for AudioProcessorGraph::AudioGraphIOProcessor:

[legend]

Public Types
enum	IODeviceType { audioInputNode, audioOutputNode, midiInputNode, midiOutputNode }
	Specifies the mode in which this processor will operate. More...

enum	ProcessingPrecision { singlePrecision, doublePrecision }

enum	WrapperType { wrapperType_Undefined = 0, wrapperType_VST, wrapperType_VST3, wrapperType_AudioUnit, wrapperType_AudioUnitv3, wrapperType_RTAS, wrapperType_AAX, wrapperType_Standalone }
	Flags to indicate the type of plugin context in which a processor is being used. More...

Public Member Functions
	AudioGraphIOProcessor (const IODeviceType type)

	~AudioGraphIOProcessor ()

bool	acceptsMidi () const override
	Returns true if the processor wants midi messages. More...

bool	addBus (bool isInput)
	Dynamically request an additional bus. More...

virtual void	addListener (AudioProcessorListener *newListener)
	Adds a listener that will be called when an aspect of this processor changes. More...

void	addParameter (AudioProcessorParameter *)
	Adds a parameter to the list. More...

void	beginParameterChangeGesture (int parameterIndex)
	Sends a signal to the host to tell it that the user is about to start changing this parameter. More...

virtual bool	canAddBus (bool isInput) const
	Callback to query if a bus can currently be added. More...

virtual bool	canRemoveBus (bool isInput) const
	Callback to query if the last bus can currently be removed. More...

void	changeProgramName (int, const String &) override
	Called by the host to rename a program. More...

bool	checkBusesLayoutSupported (const BusesLayout &) const
	Returns true if the Audio processor is likely to support a given layout. More...

AudioProcessorEditor *	createEditor () override
	Creates the filter's UI. More...

AudioProcessorEditor *	createEditorIfNeeded ()
	Returns the active editor, or if there isn't one, it will create one. More...

bool	disableNonMainBuses ()
	Disables all non-main buses (aux and sidechains). More...

void	editorBeingDeleted (AudioProcessorEditor *) noexcept
	Not for public use - this is called before deleting an editor component. More...

bool	enableAllBuses ()
	Enables all buses. More...

void	endParameterChangeGesture (int parameterIndex)
	Tells the host that the user has finished changing this parameter. More...

void	fillInPluginDescription (PluginDescription &) const override
	Fills-in the appropriate parts of this plugin description object. More...

virtual int32	getAAXPluginIDForMainBusConfig (const AudioChannelSet &mainInputLayout, const AudioChannelSet &mainOutputLayout, bool idForAudioSuite) const
	AAX plug-ins need to report a unique "plug-in id" for every audio layout configuration that your AudioProcessor supports on the main bus. More...

AudioProcessorEditor *	getActiveEditor () const noexcept
	Returns the active editor, if there is one. More...

virtual StringArray	getAlternateDisplayNames () const
	Returns a list of alternative names to use for this processor. More...

int	getBlockSize () const noexcept
	Returns the current typical block size that is being used. More...

Bus *	getBus (bool isInput, int busIdx) noexcept
	Returns the audio bus with a given index and direction. More...

const Bus *	getBus (bool isInput, int busIdx) const noexcept
	Returns the audio bus with a given index and direction. More...

template<typename FloatType >
AudioBuffer< FloatType >	getBusBuffer (AudioBuffer< FloatType > &processBlockBuffer, bool isInput, int busIndex) const
	Returns an AudioBuffer containing a set of channel pointers for a specific bus. More...

int	getBusCount (bool isInput) const noexcept
	Returns the number of buses on the input or output side. More...

BusesLayout	getBusesLayout () const
	Provides the current channel layouts of this audio processor. More...

const CriticalSection &	getCallbackLock () const noexcept
	This returns a critical section that will automatically be locked while the host is calling the processBlock() method. More...

int	getChannelCountOfBus (bool isInput, int busIdx) const noexcept
	Provides the number of channels of the bus with a given index and direction. More...

int	getChannelIndexInProcessBlockBuffer (bool isInput, int busIndex, int channelIndex) const noexcept
	Returns the position of a bus's channels within the processBlock buffer. More...

AudioChannelSet	getChannelLayoutOfBus (bool isInput, int busIndex) const noexcept
	Provides the channel layout of the bus with a given index and direction. More...

int	getCurrentProgram () override
	Returns the number of the currently active program. More...

virtual void	getCurrentProgramStateInformation (juce::MemoryBlock &destData)
	The host will call this method if it wants to save the state of just the filter's current program. More...

int	getLatencySamples () const noexcept
	This returns the number of samples delay that the filter imposes on the audio passing through it. More...

int	getMainBusNumInputChannels () const noexcept
	Returns the number of input channels on the main bus. More...

int	getMainBusNumOutputChannels () const noexcept
	Returns the number of output channels on the main bus. More...

const String	getName () const override
	Returns the name of this processor. More...

template<int numLayouts>
BusesLayout	getNextBestLayoutInLayoutList (const BusesLayout &layouts, const short(&channelLayoutList) [numLayouts][2])
	Returns the next best layout which is contained in a channel layout map. More...

virtual int	getNumParameters ()
	This must return the correct value immediately after the object has been created, and mustn't change the number of parameters later. More...

int	getNumPrograms () override
	Returns the number of preset programs the filter supports. More...

int	getOffsetInBusBufferForAbsoluteChannelIndex (bool isInput, int absoluteChannelIndex, int &busIdx) const noexcept
	Returns the offset in a bus's buffer from an absolute channel indes. More...

virtual float	getParameter (int parameterIndex)
	Called by the host to find out the value of one of the filter's parameters. More...

virtual AudioProcessorParameter::Category	getParameterCategory (int parameterIndex) const
	Should return the parameter's category. More...

virtual float	getParameterDefaultValue (int parameterIndex)
	Returns the default value for the parameter. More...

virtual String	getParameterID (int index)
	Returns the ID of a particular parameter. More...

virtual String	getParameterLabel (int index) const
	Some plugin types may be able to return a label string for a parameter's units. More...

virtual const String	getParameterName (int parameterIndex)
	Returns the name of a particular parameter. More...

virtual String	getParameterName (int parameterIndex, int maximumStringLength)
	Returns the name of a parameter as a text string with a preferred maximum length. More...

virtual int	getParameterNumSteps (int parameterIndex)
	Returns the number of discrete steps that this parameter can represent. More...

const OwnedArray< AudioProcessorParameter > &	getParameters () const noexcept
	Returns the current list of parameters. More...

virtual const String	getParameterText (int parameterIndex)
	Returns the value of a parameter as a text string. More...

virtual String	getParameterText (int parameterIndex, int maximumStringLength)
	Returns the value of a parameter as a text string with a preferred maximum length. More...

AudioProcessorGraph *	getParentGraph () const noexcept
	Returns the parent graph to which this processor belongs, or nullptr if it hasn't yet been added to one. More...

virtual void *	getPlatformSpecificData ()
	Returns a pointer to some kind of platform-specific data about the plugin. More...

AudioPlayHead *	getPlayHead () const noexcept
	Returns the current AudioPlayHead object that should be used to find out the state and position of the playhead. More...

PluginDescription	getPluginDescription () const
	Returns a PluginDescription for this plugin. More...

ProcessingPrecision	getProcessingPrecision () const noexcept
	Returns the precision-mode of the processor. More...

const String	getProgramName (int) override
	Must return the name of a given program. More...

double	getSampleRate () const noexcept
	Returns the current sample rate. More...

void	getStateInformation (juce::MemoryBlock &destData) override
	The host will call this method when it wants to save the filter's internal state. More...

double	getTailLengthSeconds () const override
	Returns the length of the filter's tail, in seconds. More...

int	getTotalNumInputChannels () const noexcept
	Returns the total number of input channels. More...

int	getTotalNumOutputChannels () const noexcept
	Returns the total number of output channels. More...

IODeviceType	getType () const noexcept
	Returns the mode of this processor. More...

bool	hasEditor () const override
	Your filter must override this and return true if it can create an editor component. More...

bool	isInput () const noexcept
	True if this is an audio or midi input. More...

virtual bool	isMetaParameter (int parameterIndex) const
	Should return true if this parameter is a "meta" parameter. More...

virtual bool	isMidiEffect () const
	Returns true if this is a midi effect plug-in and does no audio processing. More...

bool	isNonRealtime () const noexcept
	Returns true if the processor is being run in an offline mode for rendering. More...

bool	isOutput () const noexcept
	True if this is an audio or midi output. More...

virtual bool	isParameterAutomatable (int parameterIndex) const
	Returns true if the host can automate this parameter. More...

virtual bool	isParameterOrientationInverted (int index) const
	This can be overridden to tell the host that particular parameters operate in the reverse direction. More...

bool	isSuspended () const noexcept
	Returns true if processing is currently suspended. More...

bool	isUsingDoublePrecision () const noexcept
	Returns true if the current precision is set to doublePrecision. More...

virtual void	numBusesChanged ()
	This method is called when the number of buses is changed. More...

virtual void	numChannelsChanged ()
	This method is called when the total number of input or output channels is changed. More...

void	prepareToPlay (double newSampleRate, int estimatedSamplesPerBlock) override
	Called before playback starts, to let the filter prepare itself. More...

void	processBlock (AudioBuffer< float > &, MidiBuffer &) override
	Renders the next block. More...

void	processBlock (AudioBuffer< double > &, MidiBuffer &) override
	Renders the next block. More...

virtual void	processBlockBypassed (AudioBuffer< float > &buffer, MidiBuffer &midiMessages)
	Renders the next block when the processor is being bypassed. More...

virtual void	processBlockBypassed (AudioBuffer< double > &buffer, MidiBuffer &midiMessages)
	Renders the next block when the processor is being bypassed. More...

virtual void	processorLayoutsChanged ()
	This method is called when the layout of the audio processor changes. More...

bool	producesMidi () const override
	Returns true if the processor produces midi messages. More...

virtual void	refreshParameterList ()
	For some formats (currently AudioUnit), this forces a reload of the list of available parameters. More...

void	releaseResources () override
	Called after playback has stopped, to let the filter free up any resources it no longer needs. More...

bool	removeBus (bool isInput)
	Dynamically remove the latest added bus. More...

virtual void	removeListener (AudioProcessorListener *listenerToRemove)
	Removes a previously added listener. More...

virtual void	reset ()
	A plugin can override this to be told when it should reset any playing voices. More...

bool	setBusesLayout (const BusesLayout &)
	Set the channel layouts of this audio processor. More...

bool	setBusesLayoutWithoutEnabling (const BusesLayout &)
	Set the channel layouts of this audio processor without changing the enablement state of the buses. More...

bool	setChannelLayoutOfBus (bool isInput, int busIdx, const AudioChannelSet &layout)
	Set the channel layout of the bus with a given index and direction. More...

void	setCurrentProgram (int) override
	Called by the host to change the current program. More...

virtual void	setCurrentProgramStateInformation (const void *data, int sizeInBytes)
	The host will call this method if it wants to restore the state of just the filter's current program. More...

void	setLatencySamples (int newLatency)
	The filter should call this to set the number of samples delay that it introduces. More...

virtual void	setNonRealtime (bool isNonRealtime) noexcept
	Called by the host to tell this processor whether it's being used in a non-realtime capacity for offline rendering or bouncing. More...

virtual void	setParameter (int parameterIndex, float newValue)
	The host will call this method to change the value of one of the filter's parameters. More...

void	setParameterNotifyingHost (int parameterIndex, float newValue)
	Your filter can call this when it needs to change one of its parameters. More...

void	setParentGraph (AudioProcessorGraph *)

void	setPlayConfigDetails (int numIns, int numOuts, double sampleRate, int blockSize)
	This is called by the processor to specify its details before being played. More...

virtual void	setPlayHead (AudioPlayHead *newPlayHead)
	Tells the processor to use this playhead object. More...

void	setProcessingPrecision (ProcessingPrecision newPrecision) noexcept
	Changes the processing precision of the receiver. More...

void	setRateAndBufferSizeDetails (double sampleRate, int blockSize) noexcept
	This is called by the processor to specify its details before being played. More...

void	setStateInformation (const void *data, int sizeInBytes) override
	This must restore the filter's state from a block of data previously created using getStateInformation(). More...

bool	supportsDoublePrecisionProcessing () const override
	Returns true if the Audio processor supports double precision floating point processing. More...

virtual bool	supportsMPE () const
	Returns true if the processor supports MPE. More...

void	suspendProcessing (bool shouldBeSuspended)
	Enables and disables the processing callback. More...

void	updateHostDisplay ()
	The filter can call this when something (apart from a parameter value) has changed. More...

Static Public Member Functions
template<int numLayouts>
static bool	containsLayout (const BusesLayout &layouts, const short(&channelLayoutList) [numLayouts][2])
	Returns true if the channel layout map contains a certain layout. More...

static void	copyXmlToBinary (const XmlElement &xml, juce::MemoryBlock &destData)
	Helper function that just converts an xml element into a binary blob. More...

static int	getDefaultNumParameterSteps () noexcept
	Returns the default number of steps for a parameter. More...

static XmlElement *	getXmlFromBinary (const void *data, int sizeInBytes)
	Retrieves an XML element that was stored as binary with the copyXmlToBinary() method. More...

static void	setTypeOfNextNewPlugin (WrapperType)

Public Attributes
WrapperType	wrapperType
	When loaded by a plugin wrapper, this flag will be set to indicate the type of plugin within which the processor is running. More...

Protected Member Functions
virtual bool	canApplyBusCountChange (bool isInput, bool isAddingBuses, BusProperties &outNewBusProperties)
	Callback to query if adding/removing buses currently possible. More...

virtual bool	canApplyBusesLayout (const BusesLayout &layouts) const
	Callback to check if a certain bus layout can now be applied. More...

virtual bool	isBusesLayoutSupported (const BusesLayout &) const
	Callback to query if the AudioProcessor supports a specific layout. More...

void	sendParamChangeMessageToListeners (int parameterIndex, float newValue)

Protected Attributes
AudioPlayHead *	playHead

Private Member Functions
template<typename floatType >
void	processAudio (AudioBuffer< floatType > &buffer, MidiBuffer &midiMessages)

Private Attributes
AudioProcessorGraph *	graph

const IODeviceType	type

Detailed Description

A special type of AudioProcessor that can live inside an AudioProcessorGraph in order to use the audio that comes into and out of the graph itself.

If you create an AudioGraphIOProcessor in "input" mode, it will act as a node in the graph which delivers the audio that is coming into the parent graph. This allows you to stream the data to other nodes and process the incoming audio.

Likewise, one of these in "output" mode can be sent data which it will add to the sum of data being sent to the graph's output.

See also: AudioProcessorGraph

Member Enumeration Documentation

◆ IODeviceType

enum AudioProcessorGraph::AudioGraphIOProcessor::IODeviceType

Specifies the mode in which this processor will operate.

Enumerator
audioInputNode	In this mode, the processor has output channels representing all the audio input channels that are coming into its parent audio graph.
audioOutputNode	In this mode, the processor has input channels representing all the audio output channels that are going out of its parent audio graph.
midiInputNode	In this mode, the processor has a midi output which delivers the same midi data that is arriving at its parent graph.
midiOutputNode	In this mode, the processor has a midi input and any data sent to it will be passed out of the parent graph.

◆ ProcessingPrecision

enum AudioProcessor::ProcessingPrecision

inherited

Enumerator
singlePrecision
doublePrecision

◆ WrapperType

enum AudioProcessor::WrapperType

inherited

Flags to indicate the type of plugin context in which a processor is being used.

Enumerator
wrapperType_Undefined
wrapperType_VST
wrapperType_VST3
wrapperType_AudioUnit
wrapperType_AudioUnitv3
wrapperType_RTAS
wrapperType_AAX
wrapperType_Standalone

Constructor & Destructor Documentation

◆ AudioGraphIOProcessor()

AudioProcessorGraph::AudioGraphIOProcessor::AudioGraphIOProcessor ( const IODeviceType type )

◆ ~AudioGraphIOProcessor()

AudioProcessorGraph::AudioGraphIOProcessor::~AudioGraphIOProcessor ( )

Member Function Documentation

◆ acceptsMidi()

bool AudioProcessorGraph::AudioGraphIOProcessor::acceptsMidi ( ) const

overridevirtual

Returns true if the processor wants midi messages.

Implements AudioProcessor.

◆ addBus()

bool AudioProcessor::addBus ( bool isInput )

inherited

Dynamically request an additional bus.

Request an additional bus from the audio processor. If the audio processor does not support adding additional buses then this method will return false.

Most audio processors will not allow you to dynamically add/remove audio buses and will return false.

This method will invoke the canApplyBusCountChange callback to probe if a bus can be added and, if yes, will use the supplied bus properties of the canApplyBusCountChange callback to create a new bus.

See also: canApplyBusCountChange, removeBus

Referenced by AudioProcessor::canRemoveBus().

◆ addListener()

virtual void AudioProcessor::addListener ( AudioProcessorListener * newListener )

virtualinherited

Adds a listener that will be called when an aspect of this processor changes.

Referenced by AudioProcessor::getActiveEditor().

◆ addParameter()

void AudioProcessor::addParameter ( AudioProcessorParameter * )

inherited

Adds a parameter to the list.

The parameter object will be managed and deleted automatically by the list when no longer needed.

Referenced by AudioProcessor::getActiveEditor().

◆ beginParameterChangeGesture()

void AudioProcessor::beginParameterChangeGesture ( int parameterIndex )

inherited

Sends a signal to the host to tell it that the user is about to start changing this parameter.

This allows the host to know when a parameter is actively being held by the user, and it may use this information to help it record automation.

If you call this, it must be matched by a later call to endParameterChangeGesture().

NOTE! This method will eventually be deprecated! It's recommended that you use AudioProcessorParameter::beginChangeGesture() instead.

Referenced by AudioProcessor::getActiveEditor().

◆ canAddBus()

virtual bool AudioProcessor::canAddBus ( bool isInput ) const

inlinevirtualinherited

Callback to query if a bus can currently be added.

This callback probes if a bus can currently be added. You should override this callback if you want to support dynamically adding/removing buses by the host. This is useful for mixer audio processors.

The default implementation will always return false.

See also: addBus

References juce::ignoreUnused().

◆ canApplyBusCountChange()

virtual bool AudioProcessor::canApplyBusCountChange	(	bool	isInput,
		bool	isAddingBuses,
		BusProperties &	outNewBusProperties
	)

protectedvirtualinherited

Callback to query if adding/removing buses currently possible.

This callback is called when the host calls addBus or removeBus. Similar to canApplyBusesLayout, this callback is only called while the AudioProcessor is stopped and gives the processor a last chance to reject a requested bus change. It can also be used to apply the bus count change to an underlying wrapped plug-in.

When adding a bus, isAddingBuses will be true and the plug-in is expected to fill out outNewBusProperties with the properties of the bus which will be created just after the succesful return of this callback.

Implementations of AudioProcessor will rarely need to override this method. Only override this method if your processor supports adding and removing buses and if it needs more fine grain control over the naming of new buses or may reject bus number changes although canAddBus or canRemoveBus returned true.

The default implementation will return false if canAddBus/canRemoveBus returns false (the default behavior). Otherwise, this method returns "Input #busIdx" for input buses and "Output #busIdx" for output buses where busIdx is the index for newly created buses. The default layout in this case will be the layout of the previous bus of the same direction.

◆ canApplyBusesLayout()

virtual bool AudioProcessor::canApplyBusesLayout ( const BusesLayout & layouts ) const

inlineprotectedvirtualinherited

Callback to check if a certain bus layout can now be applied.

Most subclasses will not need to override this method and should instead override the isBusesLayoutSupported callback to reject certain layout changes.

This callback is called when the user requests a layout change. It will only be called if processing of the AudioProcessor has been stopped by a previous call to releaseResources or after the construction of the AudioProcessor. It will be called just before the actual layout change. By returning false you will abort the layout change and setBusesLayout will return false indicating that the layout change was not successful.

The default implementation will simply call isBusesLayoutSupported.

You only need to override this method if there is a chance that your AudioProcessor may not accept a layout although you have previously claimed to support it via the isBusesLayoutSupported callback. This can occur if your AudioProcessor's supported layouts depend on other plug-in parameters which may have changed since the last call to isBusesLayoutSupported, such as the format of an audio file which can be selected by the user in the AudioProcessor's editor. This callback gives the AudioProcessor a last chance to reject a layout if conditions have changed as it is always called just before the actual layout change.

As it is never called while the AudioProcessor is processing audio, it can also be used for AudioProcessors which wrap other plug-in formats to apply the current layout to the underlying plug-in. This callback gives such AudioProcessors a chance to reject the layout change should an error occur with the underlying plug-in during the layout change.

See also: isBusesLayoutSupported, setBusesLayout

References AudioProcessor::isBusesLayoutSupported().

◆ canRemoveBus()

virtual bool AudioProcessor::canRemoveBus ( bool isInput ) const

inlinevirtualinherited

Callback to query if the last bus can currently be removed.

This callback probes if the last bus can currently be removed. You should override this callback if you want to support dynamically adding/removing buses by the host. This is useful for mixer audio processors.

If you return true in this callback then the AudioProcessor will go ahead and delete the bus.

The default implementation will always return false.

References AudioProcessor::addBus(), AudioProcessor::getBusesLayout(), AudioProcessor::getChannelLayoutOfBus(), juce::ignoreUnused(), AudioProcessor::removeBus(), AudioProcessor::setBusesLayout(), AudioProcessor::setBusesLayoutWithoutEnabling(), and AudioProcessor::setChannelLayoutOfBus().

◆ changeProgramName()

void AudioProcessorGraph::AudioGraphIOProcessor::changeProgramName	(	int	index,
		const String &	newName
	)

overridevirtual

Called by the host to rename a program.

Implements AudioProcessor.

◆ checkBusesLayoutSupported()

bool AudioProcessor::checkBusesLayoutSupported ( const BusesLayout & ) const

inherited

Returns true if the Audio processor is likely to support a given layout.

This can be called regardless if the processor is currently running.

Referenced by AudioProcessor::getBusBuffer().

◆ containsLayout()

template<int numLayouts>

static bool AudioProcessor::containsLayout	(	const BusesLayout &	layouts,
		const short(&)	channelLayoutList[numLayouts][2]
	)

inlinestaticinherited

Returns true if the channel layout map contains a certain layout.

You can use this method to help you implement the checkBusesLayoutSupported method. For example

bool checkBusesLayoutSupported (const BusesLayout& layouts) override
{
    return containsLayout (layouts, {{1,1},{2,2}});
}

References AudioProcessor::layoutListToArray().

Referenced by AudioProcessor::getMainBusNumOutputChannels().

◆ copyXmlToBinary()

static void AudioProcessor::copyXmlToBinary	(	const XmlElement &	xml,
		juce::MemoryBlock &	destData
	)

staticinherited

Helper function that just converts an xml element into a binary blob.

Use this in your filter's getStateInformation() method if you want to store its state as xml.

Then use getXmlFromBinary() to reverse this operation and retrieve the XML from a binary blob.

◆ createEditor()

AudioProcessorEditor* AudioProcessorGraph::AudioGraphIOProcessor::createEditor ( )

overridevirtual

Creates the filter's UI.

This can return nullptr if you want a UI-less filter, in which case the host may create a generic UI that lets the user twiddle the parameters directly.

If you do want to pass back a component, the component should be created and set to the correct size before returning it. If you implement this method, you must also implement the hasEditor() method and make it return true.

Remember not to do anything silly like allowing your filter to keep a pointer to the component that gets created - it could be deleted later without any warning, which would make your pointer into a dangler. Use the getActiveEditor() method instead.

The correct way to handle the connection between an editor component and its filter is to use something like a ChangeBroadcaster so that the editor can register itself as a listener, and be told when a change occurs. This lets them safely unregister themselves when they are deleted.

Here are a few things to bear in mind when writing an editor:

Initially there won't be an editor, until the user opens one, or they might not open one at all. Your filter mustn't rely on it being there.
An editor object may be deleted and a replacement one created again at any time.
It's safe to assume that an editor will be deleted before its filter.

See also: hasEditor

Implements AudioProcessor.

◆ createEditorIfNeeded()

AudioProcessorEditor* AudioProcessor::createEditorIfNeeded ( )

inherited

Returns the active editor, or if there isn't one, it will create one.

This may call createEditor() internally to create the component.

Referenced by AudioProcessor::getActiveEditor().

◆ disableNonMainBuses()

bool AudioProcessor::disableNonMainBuses ( )

inherited

Disables all non-main buses (aux and sidechains).

Referenced by StandalonePluginHolder::createPlugin(), and AudioProcessor::getChannelCountOfBus().

◆ editorBeingDeleted()

void AudioProcessor::editorBeingDeleted ( AudioProcessorEditor * )

noexceptinherited

Not for public use - this is called before deleting an editor component.

Referenced by AudioProcessor::getActiveEditor().

◆ enableAllBuses()

bool AudioProcessor::enableAllBuses ( )

inherited

Enables all buses.

Referenced by AudioProcessor::getChannelCountOfBus().

◆ endParameterChangeGesture()

void AudioProcessor::endParameterChangeGesture ( int parameterIndex )

inherited

Tells the host that the user has finished changing this parameter.

This allows the host to know when a parameter is actively being held by the user, and it may use this information to help it record automation.

A call to this method must follow a call to beginParameterChangeGesture().

NOTE! This method will eventually be deprecated! It's recommended that you use AudioProcessorParameter::endChangeGesture() instead.

Referenced by AudioProcessor::getActiveEditor().

◆ fillInPluginDescription()

void AudioProcessorGraph::AudioGraphIOProcessor::fillInPluginDescription ( PluginDescription & description ) const

overridevirtual

Fills-in the appropriate parts of this plugin description object.

Implements AudioPluginInstance.

◆ getAAXPluginIDForMainBusConfig()

virtual int32 AudioProcessor::getAAXPluginIDForMainBusConfig	(	const AudioChannelSet &	mainInputLayout,
		const AudioChannelSet &	mainOutputLayout,
		bool	idForAudioSuite
	)		const

virtualinherited

AAX plug-ins need to report a unique "plug-in id" for every audio layout configuration that your AudioProcessor supports on the main bus.

Override this function if you want your AudioProcessor to use a custom "plug-in id" (for example to stay backward compatible with older versions of JUCE).

The default implementation will compute a unique integer from the input and output layout and add this value to the 4 character code 'jcaa' (for native AAX) or 'jyaa' (for AudioSuite plug-ins).

Referenced by AudioProcessor::getActiveEditor().

◆ getActiveEditor()

AudioProcessorEditor* AudioProcessor::getActiveEditor ( ) const

inlinenoexceptinherited

Returns the active editor, if there is one.

Bear in mind this can return nullptr, even if an editor has previously been opened.

◆ getAlternateDisplayNames()

virtual StringArray AudioProcessor::getAlternateDisplayNames ( ) const

virtualinherited

Returns a list of alternative names to use for this processor.

Some hosts truncate the name of your AudioProcessor when there isn't enough space in the GUI to show the full name. Overriding this method, allows the host to choose an alternative name (such as an abbreviation) to better fit the available space.

◆ getBlockSize()

int AudioProcessor::getBlockSize ( ) const

inlinenoexceptinherited

Returns the current typical block size that is being used.

This can be called from your processBlock() method - it's not guaranteed to be valid at any other time.

Remember it's not the ONLY block size that may be used when calling processBlock, it's just the normal one. The actual block sizes used may be larger or smaller than this, and will vary between successive calls.

References AudioProcessor::blockSize.

◆ getBus() [1/2]

Bus* AudioProcessor::getBus	(	bool	isInput,
		int	busIdx
	)

inlinenoexceptinherited

Returns the audio bus with a given index and direction.

If busIdx is invalid then this method will return a nullptr.

References AudioProcessor::inputBuses, and AudioProcessor::outputBuses.

Referenced by AudioUnitHelpers::getAUChannelInfo(), AudioProcessor::getBus(), AudioProcessor::getChannelCountOfBus(), and AudioUnitHelpers::isLayoutSupported().

◆ getBus() [2/2]

const Bus* AudioProcessor::getBus	(	bool	isInput,
		int	busIdx
	)		const

inlinenoexceptinherited

Returns the audio bus with a given index and direction.

If busIdx is invalid then this method will return a nullptr.

References AudioProcessor::getBus().

◆ getBusBuffer()

template<typename FloatType >

AudioBuffer<FloatType> AudioProcessor::getBusBuffer	(	AudioBuffer< FloatType > &	processBlockBuffer,
		bool	isInput,
		int	busIndex
	)		const

inlineinherited

Returns an AudioBuffer containing a set of channel pointers for a specific bus.

This can be called in processBlock to get a buffer containing a sub-group of the master AudioSampleBuffer which contains all the plugin channels.

References AudioProcessor::checkBusesLayoutSupported(), AudioBuffer< Type >::getArrayOfWritePointers(), AudioProcessor::getChannelCountOfBus(), AudioProcessor::getChannelIndexInProcessBlockBuffer(), AudioBuffer< Type >::getNumSamples(), and AudioProcessor::supportsDoublePrecisionProcessing().

◆ getBusCount()

int AudioProcessor::getBusCount ( bool isInput ) const

inlinenoexceptinherited

Returns the number of buses on the input or output side.

References AudioProcessor::inputBuses, and AudioProcessor::outputBuses.

Referenced by AudioUnitHelpers::getBusCount(), AudioUnitHelpers::getBusesLayout(), and AudioUnitHelpers::setBusesLayout().

◆ getBusesLayout()

BusesLayout AudioProcessor::getBusesLayout ( ) const

inherited

Provides the current channel layouts of this audio processor.

Referenced by AudioProcessor::canRemoveBus(), AudioUnitHelpers::getAUChannelInfo(), and AudioUnitHelpers::getBusesLayout().

◆ getCallbackLock()

const CriticalSection& AudioProcessor::getCallbackLock ( ) const

inlinenoexceptinherited

This returns a critical section that will automatically be locked while the host is calling the processBlock() method.

Use it from your UI or other threads to lock access to variables that are used by the process callback, but obviously be careful not to keep it locked for too long, because that could cause stuttering playback. If you need to do something that'll take a long time and need the processing to stop while it happens, use the suspendProcessing() method instead.

See also: suspendProcessing

References AudioProcessor::callbackLock, and AudioProcessor::suspendProcessing().

◆ getChannelCountOfBus()

int AudioProcessor::getChannelCountOfBus	(	bool	isInput,
		int	busIdx
	)		const

inlinenoexceptinherited

Provides the number of channels of the bus with a given index and direction.

If the index, direction combination is invalid then this will return zero.

References AudioProcessor::disableNonMainBuses(), AudioProcessor::enableAllBuses(), AudioProcessor::getBus(), AudioProcessor::getChannelIndexInProcessBlockBuffer(), and AudioProcessor::getOffsetInBusBufferForAbsoluteChannelIndex().

Referenced by AudioUnitHelpers::getAUChannelInfo(), AudioProcessor::getBusBuffer(), AudioProcessor::getMainBusNumInputChannels(), AudioProcessor::getMainBusNumOutputChannels(), and AudioUnitHelpers::ChannelRemapper::initializeChannelMapArray().

◆ getChannelIndexInProcessBlockBuffer()

int AudioProcessor::getChannelIndexInProcessBlockBuffer	(	bool	isInput,
		int	busIndex,
		int	channelIndex
	)		const

noexceptinherited

Returns the position of a bus's channels within the processBlock buffer.

This can be called in processBlock to figure out which channel of the master AudioSampleBuffer maps onto a specific bus's channel.

Referenced by AudioProcessor::getBusBuffer(), and AudioProcessor::getChannelCountOfBus().

◆ getChannelLayoutOfBus()

AudioChannelSet AudioProcessor::getChannelLayoutOfBus	(	bool	isInput,
		int	busIndex
	)		const

noexceptinherited

Provides the channel layout of the bus with a given index and direction.

If the index, direction combination is invalid then this will return an AudioChannelSet with no channels.

Referenced by AudioProcessor::canRemoveBus(), and AudioUnitHelpers::ChannelRemapper::fillLayoutChannelMaps().

◆ getCurrentProgram()

int AudioProcessorGraph::AudioGraphIOProcessor::getCurrentProgram ( )

overridevirtual

Returns the number of the currently active program.

Implements AudioProcessor.

◆ getCurrentProgramStateInformation()

virtual void AudioProcessor::getCurrentProgramStateInformation ( juce::MemoryBlock & destData )

virtualinherited

The host will call this method if it wants to save the state of just the filter's current program.

Unlike getStateInformation, this should only return the current program's state.

Not all hosts support this, and if you don't implement it, the base class method just calls getStateInformation() instead. If you do implement it, be sure to also implement getCurrentProgramStateInformation.

See also: getStateInformation, setCurrentProgramStateInformation

Referenced by AudioProcessor::getActiveEditor().

◆ getDefaultNumParameterSteps()

static int AudioProcessor::getDefaultNumParameterSteps ( )

staticnoexceptinherited

Returns the default number of steps for a parameter.

NOTE! This method will eventually be deprecated! It's recommended that you use AudioProcessorParameter::getNumSteps() instead.

See also: getParameterNumSteps

Referenced by AudioProcessor::getActiveEditor().

◆ getLatencySamples()

int AudioProcessor::getLatencySamples ( ) const

inlinenoexceptinherited

This returns the number of samples delay that the filter imposes on the audio passing through it.

The host will call this to find the latency - the filter itself should set this value by calling setLatencySamples() as soon as it can during its initialisation.

References AudioProcessor::acceptsMidi(), AudioProcessor::getTailLengthSeconds(), AudioProcessor::latencySamples, AudioProcessor::producesMidi(), and AudioProcessor::setLatencySamples().

◆ getMainBusNumInputChannels()

int AudioProcessor::getMainBusNumInputChannels ( ) const

inlinenoexceptinherited

Returns the number of input channels on the main bus.

References AudioProcessor::getChannelCountOfBus().

Referenced by StandalonePluginHolder::createPlugin(), StandalonePluginHolder::reloadAudioDeviceState(), StandalonePluginHolder::showAudioSettingsDialog(), and StandalonePluginHolder::StandalonePluginHolder().

◆ getMainBusNumOutputChannels()

int AudioProcessor::getMainBusNumOutputChannels ( ) const

inlinenoexceptinherited

Returns the number of output channels on the main bus.

References AudioProcessor::containsLayout(), AudioProcessor::getChannelCountOfBus(), and AudioProcessor::layoutListToArray().

Referenced by StandalonePluginHolder::createPlugin(), StandalonePluginHolder::reloadAudioDeviceState(), and StandalonePluginHolder::showAudioSettingsDialog().

◆ getName()

const String AudioProcessorGraph::AudioGraphIOProcessor::getName ( ) const

overridevirtual

Returns the name of this processor.

Implements AudioProcessor.

◆ getNextBestLayoutInLayoutList()

template<int numLayouts>

BusesLayout AudioProcessor::getNextBestLayoutInLayoutList	(	const BusesLayout &	layouts,
		const short(&)	channelLayoutList[numLayouts][2]
	)

inlineinherited

Returns the next best layout which is contained in a channel layout map.

You can use this mehtod to help you implement getNextBestLayout. For example:

BusesLayout getNextBestLayout (const BusesLayout& layouts) override
{
    return getNextBestLayoutInLayoutList (layouts, {{1,1},{2,2}});
}

References AudioProcessor::getNextBestLayoutInList(), and AudioProcessor::layoutListToArray().

◆ getNumParameters()

virtual int AudioProcessor::getNumParameters ( )

virtualinherited

This must return the correct value immediately after the object has been created, and mustn't change the number of parameters later.

NOTE! This method will eventually be deprecated! It's recommended that you use the AudioProcessorParameter class instead to manage your parameters.

Referenced by AudioProcessor::getActiveEditor().

◆ getNumPrograms()

int AudioProcessorGraph::AudioGraphIOProcessor::getNumPrograms ( )

overridevirtual

Returns the number of preset programs the filter supports.

The value returned must be valid as soon as this object is created, and must not change over its lifetime.

This value shouldn't be less than 1.

Implements AudioProcessor.

◆ getOffsetInBusBufferForAbsoluteChannelIndex()

int AudioProcessor::getOffsetInBusBufferForAbsoluteChannelIndex	(	bool	isInput,
		int	absoluteChannelIndex,
		int &	busIdx
	)		const

noexceptinherited

Returns the offset in a bus's buffer from an absolute channel indes.

This method returns the offset in a bus's buffer given an absolute channel index. It also provides the bus index. For example, this method would return one for a processor with two stereo buses when given the absolute channel index.

Referenced by AudioProcessor::getChannelCountOfBus().

◆ getParameter()

virtual float AudioProcessor::getParameter ( int parameterIndex )

virtualinherited

Called by the host to find out the value of one of the filter's parameters.

The host will expect the value returned to be between 0 and 1.0.

This could be called quite frequently, so try to make your code efficient. It's also likely to be called by non-UI threads, so the code in here should be thread-aware.

NOTE! This method will eventually be deprecated! It's recommended that you use the AudioProcessorParameter class instead to manage your parameters.

Referenced by AudioProcessor::getActiveEditor().

◆ getParameterCategory()

virtual AudioProcessorParameter::Category AudioProcessor::getParameterCategory ( int parameterIndex ) const

virtualinherited

Should return the parameter's category.

By default, this returns the "generic" category.

NOTE! This method will eventually be deprecated! It's recommended that you use AudioProcessorParameter::isMetaParameter() instead.

Referenced by AudioProcessor::getActiveEditor().

◆ getParameterDefaultValue()

virtual float AudioProcessor::getParameterDefaultValue ( int parameterIndex )

virtualinherited

Returns the default value for the parameter.

By default, this just returns 0. The value that is returned may or may not be used, depending on the host.

NOTE! This method will eventually be deprecated! It's recommended that you use AudioProcessorParameter::getDefaultValue() instead.

Referenced by AudioProcessor::getActiveEditor().

◆ getParameterID()

virtual String AudioProcessor::getParameterID ( int index )

virtualinherited

Returns the ID of a particular parameter.

The ID is used to communicate the value or mapping of a particular parameter with the host. By default this method will simply return a string representation of index.

NOTE! This method will eventually be deprecated! It's recommended that you use the AudioProcessorParameterWithID class instead to manage your parameters.

Referenced by AudioProcessor::getActiveEditor().

◆ getParameterLabel()

virtual String AudioProcessor::getParameterLabel ( int index ) const

virtualinherited

Some plugin types may be able to return a label string for a parameter's units.

NOTE! This method will eventually be deprecated! It's recommended that you use AudioProcessorParameter::getLabel() instead.

Referenced by AudioProcessor::getActiveEditor().

◆ getParameterName() [1/2]

virtual const String AudioProcessor::getParameterName ( int parameterIndex )

virtualinherited

Returns the name of a particular parameter.

NOTE! This method will eventually be deprecated! It's recommended that you use the AudioProcessorParameter class instead to manage your parameters.

Referenced by AudioProcessor::getActiveEditor().

◆ getParameterName() [2/2]

virtual String AudioProcessor::getParameterName	(	int	parameterIndex,
		int	maximumStringLength
	)

virtualinherited

Returns the name of a parameter as a text string with a preferred maximum length.

If you want to provide customised short versions of your parameter names that will look better in constrained spaces (e.g. the displays on hardware controller devices or mixing desks) then you should implement this method. If you don't override it, the default implementation will call getParameterName(int), and truncate the result.

NOTE! This method will eventually be deprecated! It's recommended that you use AudioProcessorParameter::getName() instead.

◆ getParameterNumSteps()

virtual int AudioProcessor::getParameterNumSteps ( int parameterIndex )

virtualinherited

Returns the number of discrete steps that this parameter can represent.

The default return value if you don't implement this method is AudioProcessor::getDefaultNumParameterSteps(). If your parameter is boolean, then you may want to make this return 2. The value that is returned may or may not be used, depending on the host.

NOTE! This method will eventually be deprecated! It's recommended that you use AudioProcessorParameter::getNumSteps() instead.

Referenced by AudioProcessor::getActiveEditor().

◆ getParameters()

const OwnedArray<AudioProcessorParameter>& AudioProcessor::getParameters ( ) const

noexceptinherited

Returns the current list of parameters.

Referenced by AudioProcessor::getActiveEditor().

◆ getParameterText() [1/2]

virtual const String AudioProcessor::getParameterText ( int parameterIndex )

virtualinherited

Returns the value of a parameter as a text string.

NOTE! This method will eventually be deprecated! It's recommended that you use AudioProcessorParameter::getText() instead.

Referenced by AudioProcessor::getActiveEditor().

◆ getParameterText() [2/2]

virtual String AudioProcessor::getParameterText	(	int	parameterIndex,
		int	maximumStringLength
	)

virtualinherited

Returns the value of a parameter as a text string with a preferred maximum length.

If you want to provide customised short versions of your parameter values that will look better in constrained spaces (e.g. the displays on hardware controller devices or mixing desks) then you should implement this method. If you don't override it, the default implementation will call getParameterText(int), and truncate the result.

NOTE! This method will eventually be deprecated! It's recommended that you use AudioProcessorParameter::getText() instead.

◆ getParentGraph()

AudioProcessorGraph* AudioProcessorGraph::AudioGraphIOProcessor::getParentGraph ( ) const

inlinenoexcept

Returns the parent graph to which this processor belongs, or nullptr if it hasn't yet been added to one.

◆ getPlatformSpecificData()

virtual void* AudioPluginInstance::getPlatformSpecificData ( )

inlinevirtualinherited

Returns a pointer to some kind of platform-specific data about the plugin.

E.g. For a VST, this value can be cast to an AEffect*. For an AudioUnit, it can be cast to an AudioUnit handle.

◆ getPlayHead()

AudioPlayHead* AudioProcessor::getPlayHead ( ) const

inlinenoexceptinherited

Returns the current AudioPlayHead object that should be used to find out the state and position of the playhead.

You can ONLY call this from your processBlock() method! Calling it at other times will produce undefined behaviour, as the host may not have any context in which a time would make sense, and some hosts will almost certainly have multithreading issues if it's not called on the audio thread.

The AudioPlayHead object that is returned can be used to get the details about the time of the start of the block currently being processed. But do not store this pointer or use it outside of the current audio callback, because the host may delete or re-use it.

If the host can't or won't provide any time info, this will return nullptr.

References AudioProcessor::playHead.

◆ getPluginDescription()

PluginDescription AudioPluginInstance::getPluginDescription ( ) const

inlineinherited

Returns a PluginDescription for this plugin.

This is just a convenience method to avoid calling fillInPluginDescription.

◆ getProcessingPrecision()

ProcessingPrecision AudioProcessor::getProcessingPrecision ( ) const

inlinenoexceptinherited

Returns the precision-mode of the processor.

Depending on the result of this method you MUST call the corresponding version of processBlock. The default processing precision is single precision.

See also: setProcessingPrecision, supportsDoublePrecisionProcessing

References AudioProcessor::processingPrecision.

◆ getProgramName()

const String AudioProcessorGraph::AudioGraphIOProcessor::getProgramName ( int index )

overridevirtual

Must return the name of a given program.

Implements AudioProcessor.

◆ getSampleRate()

double AudioProcessor::getSampleRate ( ) const

inlinenoexceptinherited

Returns the current sample rate.

This can be called from your processBlock() method - it's not guaranteed to be valid at any other time, and may return 0 if it's unknown.

References AudioProcessor::currentSampleRate.

◆ getStateInformation()

void AudioProcessorGraph::AudioGraphIOProcessor::getStateInformation ( juce::MemoryBlock & destData )

overridevirtual

The host will call this method when it wants to save the filter's internal state.

This must copy any info about the filter's state into the block of memory provided, so that the host can store this and later restore it using setStateInformation().

Note that there's also a getCurrentProgramStateInformation() method, which only stores the current program, not the state of the entire filter.

See also the helper function copyXmlToBinary() for storing settings as XML.

See also: getCurrentProgramStateInformation

Implements AudioProcessor.

◆ getTailLengthSeconds()

double AudioProcessorGraph::AudioGraphIOProcessor::getTailLengthSeconds ( ) const

overridevirtual

Returns the length of the filter's tail, in seconds.

Implements AudioProcessor.

◆ getTotalNumInputChannels()

int AudioProcessor::getTotalNumInputChannels ( ) const

inlinenoexceptinherited

Returns the total number of input channels.

This method will return the total number of input channels by accumulating the number of channels on each input bus. The number of channels of the buffer passed to your processBlock callback will be equivalent to either getTotalNumInputChannels or getTotalNumOutputChannels - which ever is greater.

Note that getTotalNumInputChannels is equivalent to getMainBusNumInputChannels if your processor does not have any sidechains or aux buses.

References AudioProcessor::cachedTotalIns.

Referenced by AudioUnitHelpers::ChannelRemapper::initializeChannelMapArray().

◆ getTotalNumOutputChannels()

int AudioProcessor::getTotalNumOutputChannels ( ) const

inlinenoexceptinherited

Returns the total number of output channels.

This method will return the total number of output channels by accumulating the number of channels on each output bus. The number of channels of the buffer passed to your processBlock callback will be equivalent to either getTotalNumInputChannels or getTotalNumOutputChannels - which ever is greater.

Note that getTotalNumOutputChannels is equivalent to getMainBusNumOutputChannels if your processor does not have any sidechains or aux buses.

References AudioProcessor::cachedTotalOuts.

Referenced by AudioUnitHelpers::ChannelRemapper::initializeChannelMapArray().

◆ getType()

IODeviceType AudioProcessorGraph::AudioGraphIOProcessor::getType ( ) const

inlinenoexcept

Returns the mode of this processor.

◆ getXmlFromBinary()

static XmlElement* AudioProcessor::getXmlFromBinary	(	const void *	data,
		int	sizeInBytes
	)

staticinherited

Retrieves an XML element that was stored as binary with the copyXmlToBinary() method.

This might return nullptr if the data's unsuitable or corrupted. Otherwise it will return an XmlElement object that the caller must delete when no longer needed.

◆ hasEditor()

bool AudioProcessorGraph::AudioGraphIOProcessor::hasEditor ( ) const

overridevirtual

Your filter must override this and return true if it can create an editor component.

See also: createEditor

Implements AudioProcessor.

◆ isBusesLayoutSupported()

virtual bool AudioProcessor::isBusesLayoutSupported ( const BusesLayout & ) const

inlineprotectedvirtualinherited

Callback to query if the AudioProcessor supports a specific layout.

This callback is called when the host probes the supported bus layouts via the checkBusesLayoutSupported method. You should override this callback if you would like to limit the layouts that your AudioProcessor supports. The default implementation will accept any layout. JUCE does basic sanity checks so that the provided layouts parameter will have the same number of buses as your AudioProcessor.

See also: checkBusesLayoutSupported

Referenced by AudioProcessor::canApplyBusesLayout().

◆ isInput()

bool AudioProcessorGraph::AudioGraphIOProcessor::isInput ( ) const

noexcept

True if this is an audio or midi input.

◆ isMetaParameter()

virtual bool AudioProcessor::isMetaParameter ( int parameterIndex ) const

virtualinherited

Should return true if this parameter is a "meta" parameter.

A meta-parameter is a parameter that changes other params. It is used by some hosts (e.g. AudioUnit hosts). By default this returns false.

NOTE! This method will eventually be deprecated! It's recommended that you use AudioProcessorParameter::isMetaParameter() instead.

Referenced by AudioProcessor::getActiveEditor().

◆ isMidiEffect()

virtual bool AudioProcessor::isMidiEffect ( ) const

inlinevirtualinherited

Returns true if this is a midi effect plug-in and does no audio processing.

◆ isNonRealtime()

bool AudioProcessor::isNonRealtime ( ) const

inlinenoexceptinherited

Returns true if the processor is being run in an offline mode for rendering.

If the processor is being run live on realtime signals, this returns false. If the mode is unknown, this will assume it's realtime and return false.

This value may be unreliable until the prepareToPlay() method has been called, and could change each time prepareToPlay() is called.

See also: setNonRealtime()

References AudioProcessor::createEditor(), AudioProcessor::hasEditor(), AudioProcessor::nonRealtime, and AudioProcessor::setNonRealtime().

◆ isOutput()

bool AudioProcessorGraph::AudioGraphIOProcessor::isOutput ( ) const

noexcept

True if this is an audio or midi output.

◆ isParameterAutomatable()

virtual bool AudioProcessor::isParameterAutomatable ( int parameterIndex ) const

virtualinherited

Returns true if the host can automate this parameter.

By default, this returns true for all parameters.

NOTE! This method will eventually be deprecated! It's recommended that you use AudioProcessorParameter::isAutomatable() instead.

Referenced by AudioProcessor::getActiveEditor().

◆ isParameterOrientationInverted()

virtual bool AudioProcessor::isParameterOrientationInverted ( int index ) const

virtualinherited

This can be overridden to tell the host that particular parameters operate in the reverse direction.

(Not all plugin formats or hosts will actually use this information).

NOTE! This method will eventually be deprecated! It's recommended that you use AudioProcessorParameter::isOrientationInverted() instead.

Referenced by AudioProcessor::getActiveEditor().

◆ isSuspended()

bool AudioProcessor::isSuspended ( ) const

inlinenoexceptinherited

Returns true if processing is currently suspended.

See also: suspendProcessing

References AudioProcessor::reset(), and AudioProcessor::suspended.

◆ isUsingDoublePrecision()

bool AudioProcessor::isUsingDoublePrecision ( ) const

inlinenoexceptinherited

Returns true if the current precision is set to doublePrecision.

References AudioProcessor::doublePrecision, AudioProcessor::processingPrecision, and AudioProcessor::setProcessingPrecision().

◆ numBusesChanged()

virtual void AudioProcessor::numBusesChanged ( )

virtualinherited

This method is called when the number of buses is changed.

Referenced by AudioProcessor::getActiveEditor().

◆ numChannelsChanged()

virtual void AudioProcessor::numChannelsChanged ( )

virtualinherited

This method is called when the total number of input or output channels is changed.

Referenced by AudioProcessor::getActiveEditor().

◆ prepareToPlay()

void AudioProcessorGraph::AudioGraphIOProcessor::prepareToPlay	(	double	sampleRate,
		int	maximumExpectedSamplesPerBlock
	)

overridevirtual

Called before playback starts, to let the filter prepare itself.

The sample rate is the target sample rate, and will remain constant until playback stops.

You can call getTotalNumInputChannels and getTotalNumOutputChannels or query the busLayout member variable to find out the number of channels your processBlock callback must process.

The maximumExpectedSamplesPerBlock value is a strong hint about the maximum number of samples that will be provided in each block. You may want to use this value to resize internal buffers. You should program defensively in case a buggy host exceeds this value. The actual block sizes that the host uses may be different each time the callback happens: completely variable block sizes can be expected from some hosts.

See also: busLayout, getTotalNumInputChannels, getTotalNumOutputChannels

Implements AudioProcessor.

◆ processAudio()

template<typename floatType >

void AudioProcessorGraph::AudioGraphIOProcessor::processAudio	(	AudioBuffer< floatType > &	buffer,
		MidiBuffer &	midiMessages
	)

private

◆ processBlock() [1/2]

void AudioProcessorGraph::AudioGraphIOProcessor::processBlock	(	AudioBuffer< float > &	buffer,
		MidiBuffer &	midiMessages
	)

overridevirtual

Renders the next block.

When this method is called, the buffer contains a number of channels which is at least as great as the maximum number of input and output channels that this filter is using. It will be filled with the filter's input data and should be replaced with the filter's output.

So for example if your filter has a total of 2 input channels and 4 output channels, then the buffer will contain 4 channels, the first two being filled with the input data. Your filter should read these, do its processing, and replace the contents of all 4 channels with its output.

Or if your filter has a total of 5 inputs and 2 outputs, the buffer will have 5 channels, all filled with data, and your filter should overwrite the first 2 of these with its output. But be VERY careful not to write anything to the last 3 channels, as these might be mapped to memory that the host assumes is read-only!

If your plug-in has more than one input or output buses then the buffer passed to the processBlock methods will contain a bundle of all channels of each bus. Use AudiobusLayout::getBusBuffer to obtain an audio buffer for a particular bus.

Note that if you have more outputs than inputs, then only those channels that correspond to an input channel are guaranteed to contain sensible data - e.g. in the case of 2 inputs and 4 outputs, the first two channels contain the input, but the last two channels may contain garbage, so you should be careful not to let this pass through without being overwritten or cleared.

Also note that the buffer may have more channels than are strictly necessary, but you should only read/write from the ones that your filter is supposed to be using.

The number of samples in these buffers is NOT guaranteed to be the same for every callback, and may be more or less than the estimated value given to prepareToPlay(). Your code must be able to cope with variable-sized blocks, or you're going to get clicks and crashes!

Also note that some hosts will occasionally decide to pass a buffer containing zero samples, so make sure that your algorithm can deal with that!

If the filter is receiving a midi input, then the midiMessages array will be filled with the midi messages for this block. Each message's timestamp will indicate the message's time, as a number of samples from the start of the block.

Any messages left in the midi buffer when this method has finished are assumed to be the filter's midi output. This means that your filter should be careful to clear any incoming messages from the array if it doesn't want them to be passed-on.

Be very careful about what you do in this callback - it's going to be called by the audio thread, so any kind of interaction with the UI is absolutely out of the question. If you change a parameter in here and need to tell your UI to update itself, the best way is probably to inherit from a ChangeBroadcaster, let the UI components register as listeners, and then call sendChangeMessage() inside the processBlock() method to send out an asynchronous message. You could also use the AsyncUpdater class in a similar way.

See also: AudiobusLayout::getBusBuffer

Implements AudioProcessor.

◆ processBlock() [2/2]

void AudioProcessorGraph::AudioGraphIOProcessor::processBlock	(	AudioBuffer< double > &	buffer,
		MidiBuffer &	midiMessages
	)

overridevirtual

Renders the next block.

When this method is called, the buffer contains a number of channels which is at least as great as the maximum number of input and output channels that this filter is using. It will be filled with the filter's input data and should be replaced with the filter's output.

So for example if your filter has a combined total of 2 input channels and 4 output channels, then the buffer will contain 4 channels, the first two being filled with the input data. Your filter should read these, do its processing, and replace the contents of all 4 channels with its output.

Or if your filter has 5 inputs and 2 outputs, the buffer will have 5 channels, all filled with data, and your filter should overwrite the first 2 of these with its output. But be VERY careful not to write anything to the last 3 channels, as these might be mapped to memory that the host assumes is read-only!

If your plug-in has more than one input or output buses then the buffer passed to the processBlock methods will contain a bundle of all channels of each bus. Use AudiobusLayout::getBusBuffer to obtain a audio buffer for a particular bus.

Note that if you have more outputs than inputs, then only those channels that correspond to an input channel are guaranteed to contain sensible data - e.g. in the case of 2 inputs and 4 outputs, the first two channels contain the input, but the last two channels may contain garbage, so you should be careful not to let this pass through without being overwritten or cleared.

Also note that the buffer may have more channels than are strictly necessary, but you should only read/write from the ones that your filter is supposed to be using.

If your plugin uses buses, then you should use AudiobusLayout::getBusBuffer() or AudiobusLayout::getChannelIndexInProcessBlockBuffer() to find out which of the input and output channels correspond to which of the buses.

The number of samples in these buffers is NOT guaranteed to be the same for every callback, and may be more or less than the estimated value given to prepareToPlay(). Your code must be able to cope with variable-sized blocks, or you're going to get clicks and crashes!

Also note that some hosts will occasionally decide to pass a buffer containing zero samples, so make sure that your algorithm can deal with that!

If the filter is receiving a midi input, then the midiMessages array will be filled with the midi messages for this block. Each message's timestamp will indicate the message's time, as a number of samples from the start of the block.

Any messages left in the midi buffer when this method has finished are assumed to be the filter's midi output. This means that your filter should be careful to clear any incoming messages from the array if it doesn't want them to be passed-on.

Be very careful about what you do in this callback - it's going to be called by the audio thread, so any kind of interaction with the UI is absolutely out of the question. If you change a parameter in here and need to tell your UI to update itself, the best way is probably to inherit from a ChangeBroadcaster, let the UI components register as listeners, and then call sendChangeMessage() inside the processBlock() method to send out an asynchronous message. You could also use the AsyncUpdater class in a similar way.

See also: AudiobusLayout::getBusBuffer

Reimplemented from AudioProcessor.

◆ processBlockBypassed() [1/2]

virtual void AudioProcessor::processBlockBypassed	(	AudioBuffer< float > &	buffer,
		MidiBuffer &	midiMessages
	)

virtualinherited

Renders the next block when the processor is being bypassed.

The default implementation of this method will pass-through any incoming audio, but you may override this method e.g. to add latency compensation to the data to match the processor's latency characteristics. This will avoid situations where bypassing will shift the signal forward in time, possibly creating pre-echo effects and odd timings. Another use for this method would be to cross-fade or morph between the wet (not bypassed) and dry (bypassed) signals.

◆ processBlockBypassed() [2/2]

virtual void AudioProcessor::processBlockBypassed	(	AudioBuffer< double > &	buffer,
		MidiBuffer &	midiMessages
	)

virtualinherited

Renders the next block when the processor is being bypassed.

The default implementation of this method will pass-through any incoming audio, but you may override this method e.g. to add latency compensation to the data to match the processor's latency characteristics. This will avoid situations where bypassing will shift the signal forward in time, possibly creating pre-echo effects and odd timings. Another use for this method would be to cross-fade or morph between the wet (not bypassed) and dry (bypassed) signals.

◆ processorLayoutsChanged()

virtual void AudioProcessor::processorLayoutsChanged ( )

virtualinherited

This method is called when the layout of the audio processor changes.

Referenced by AudioProcessor::getActiveEditor().

◆ producesMidi()

bool AudioProcessorGraph::AudioGraphIOProcessor::producesMidi ( ) const

overridevirtual

Returns true if the processor produces midi messages.

Implements AudioProcessor.

◆ refreshParameterList()

virtual void AudioPluginInstance::refreshParameterList ( )

inlinevirtualinherited

For some formats (currently AudioUnit), this forces a reload of the list of available parameters.

◆ releaseResources()

void AudioProcessorGraph::AudioGraphIOProcessor::releaseResources ( )

overridevirtual

Called after playback has stopped, to let the filter free up any resources it no longer needs.

Implements AudioProcessor.

◆ removeBus()

bool AudioProcessor::removeBus ( bool isInput )

inherited

Dynamically remove the latest added bus.

Request the removal of the last bus from the audio processor. If the audio processor does not support removing buses then this method will return false.

Most audio processors will not allow you to dynamically add/remove audio buses and will return false.

The default implementation will return false.

This method will invoke the canApplyBusCountChange callback to probe if a bus can currently be removed and, if yes, will go ahead and remove it.

See also: addBus, canRemoveBus

Referenced by AudioProcessor::canRemoveBus().

◆ removeListener()

virtual void AudioProcessor::removeListener ( AudioProcessorListener * listenerToRemove )

virtualinherited

Removes a previously added listener.

Referenced by AudioProcessor::getActiveEditor().

◆ reset()

virtual void AudioProcessor::reset ( )

virtualinherited

A plugin can override this to be told when it should reset any playing voices.

The default implementation does nothing, but a host may call this to tell the plugin that it should stop any tails or sounds that have been left running.

Reimplemented in AudioProcessorGraph.

Referenced by AudioProcessor::isSuspended().

◆ sendParamChangeMessageToListeners()

void AudioProcessor::sendParamChangeMessageToListeners	(	int	parameterIndex,
		float	newValue
	)

protectedinherited

◆ setBusesLayout()

bool AudioProcessor::setBusesLayout ( const BusesLayout & )

inherited

Set the channel layouts of this audio processor.

If the layout is not supported by this audio processor then this method will return false. You can use the checkBusesLayoutSupported and getNextBestLayout methods to probe which layouts this audio processor supports.

Referenced by AudioProcessor::canRemoveBus(), and AudioUnitHelpers::setBusesLayout().

◆ setBusesLayoutWithoutEnabling()

bool AudioProcessor::setBusesLayoutWithoutEnabling ( const BusesLayout & )

inherited

Set the channel layouts of this audio processor without changing the enablement state of the buses.

If the layout is not supported by this audio processor then this method will return false. You can use the checkBusesLayoutSupported methods to probe which layouts this audio processor supports.

Referenced by AudioProcessor::canRemoveBus().

◆ setChannelLayoutOfBus()

bool AudioProcessor::setChannelLayoutOfBus	(	bool	isInput,
		int	busIdx,
		const AudioChannelSet &	layout
	)

inherited

Set the channel layout of the bus with a given index and direction.

If the index, direction combination is invalid or the layout is not supported by the audio processor then this method will return false.

Referenced by AudioProcessor::canRemoveBus().

◆ setCurrentProgram()

void AudioProcessorGraph::AudioGraphIOProcessor::setCurrentProgram ( int index )

overridevirtual

Called by the host to change the current program.

Implements AudioProcessor.

◆ setCurrentProgramStateInformation()

virtual void AudioProcessor::setCurrentProgramStateInformation	(	const void *	data,
		int	sizeInBytes
	)

virtualinherited

The host will call this method if it wants to restore the state of just the filter's current program.

Not all hosts support this, and if you don't implement it, the base class method just calls setStateInformation() instead. If you do implement it, be sure to also implement getCurrentProgramStateInformation.

See also: setStateInformation, getCurrentProgramStateInformation

Referenced by AudioProcessor::getActiveEditor().

◆ setLatencySamples()

void AudioProcessor::setLatencySamples ( int newLatency )

inherited

The filter should call this to set the number of samples delay that it introduces.

The filter should call this as soon as it can during initialisation, and can call it later if the value changes.

Referenced by AudioProcessor::getLatencySamples().

◆ setNonRealtime()

virtual void AudioProcessor::setNonRealtime ( bool isNonRealtime )

virtualnoexceptinherited

Called by the host to tell this processor whether it's being used in a non-realtime capacity for offline rendering or bouncing.

Reimplemented in AudioProcessorGraph.

Referenced by AudioProcessor::isNonRealtime().

◆ setParameter()

virtual void AudioProcessor::setParameter	(	int	parameterIndex,
		float	newValue
	)

virtualinherited

The host will call this method to change the value of one of the filter's parameters.

The host may call this at any time, including during the audio processing callback, so the filter has to process this very fast and avoid blocking.

If you want to set the value of a parameter internally, e.g. from your editor component, then don't call this directly - instead, use the setParameterNotifyingHost() method, which will also send a message to the host telling it about the change. If the message isn't sent, the host won't be able to automate your parameters properly.

The value passed will be between 0 and 1.0.

NOTE! This method will eventually be deprecated! It's recommended that you use AudioProcessorParameter::setValue() instead.

Referenced by AudioProcessor::getActiveEditor().

◆ setParameterNotifyingHost()

void AudioProcessor::setParameterNotifyingHost	(	int	parameterIndex,
		float	newValue
	)

inherited

Your filter can call this when it needs to change one of its parameters.

This could happen when the editor or some other internal operation changes a parameter. This method will call the setParameter() method to change the value, and will then send a message to the host telling it about the change.

Note that to make sure the host correctly handles automation, you should call the beginParameterChangeGesture() and endParameterChangeGesture() methods to tell the host when the user has started and stopped changing the parameter.

NOTE! This method will eventually be deprecated! It's recommended that you use AudioProcessorParameter::setValueNotifyingHost() instead.

Referenced by AudioProcessor::getActiveEditor().

◆ setParentGraph()

void AudioProcessorGraph::AudioGraphIOProcessor::setParentGraph ( AudioProcessorGraph * )

◆ setPlayConfigDetails()

void AudioProcessor::setPlayConfigDetails	(	int	numIns,
		int	numOuts,
		double	sampleRate,
		int	blockSize
	)

inherited

This is called by the processor to specify its details before being played.

Use this version of the function if you are not interested in any sidechain and/or aux buses and do not care about the layout of channels. Otherwise use setRateAndBufferSizeDetails.

Referenced by AudioProcessor::getActiveEditor().

◆ setPlayHead()

virtual void AudioProcessor::setPlayHead ( AudioPlayHead * newPlayHead )

virtualinherited

Tells the processor to use this playhead object.

The processor will not take ownership of the object, so the caller must delete it when it is no longer being used.

Reimplemented in AudioProcessorGraph.

Referenced by AudioProcessor::getActiveEditor(), and StandalonePluginHolder::startPlaying().

◆ setProcessingPrecision()

void AudioProcessor::setProcessingPrecision ( ProcessingPrecision newPrecision )

noexceptinherited

Changes the processing precision of the receiver.

A client of the AudioProcessor calls this function to indicate which version of processBlock (single or double precision) it intends to call. The client MUST call this function before calling the prepareToPlay method so that the receiver can do any necessary allocations in the prepareToPlay() method. An implementation of prepareToPlay() should call getProcessingPrecision() to determine with which precision it should allocate it's internal buffers.

Note that setting the processing precision to double floating point precision on a receiver which does not support double precision processing (i.e. supportsDoublePrecisionProcessing() returns false) will result in an assertion.

See also: getProcessingPrecision, supportsDoublePrecisionProcessing

Referenced by AudioProcessor::isUsingDoublePrecision().

◆ setRateAndBufferSizeDetails()

void AudioProcessor::setRateAndBufferSizeDetails	(	double	sampleRate,
		int	blockSize
	)

noexceptinherited

This is called by the processor to specify its details before being played.

You should call this function after having informed the processor about the channel and bus layouts via setBusesLayout.

See also: setBusesLayout

Referenced by StandalonePluginHolder::createPlugin(), and AudioProcessor::getActiveEditor().

◆ setStateInformation()

void AudioProcessorGraph::AudioGraphIOProcessor::setStateInformation	(	const void *	data,
		int	sizeInBytes
	)

overridevirtual

This must restore the filter's state from a block of data previously created using getStateInformation().

Note that there's also a setCurrentProgramStateInformation() method, which tries to restore just the current program, not the state of the entire filter.

See also the helper function getXmlFromBinary() for loading settings as XML.

See also: setCurrentProgramStateInformation

Implements AudioProcessor.

◆ setTypeOfNextNewPlugin()

static void AudioProcessor::setTypeOfNextNewPlugin ( WrapperType )

staticinherited

Referenced by StandalonePluginHolder::createPlugin().

◆ supportsDoublePrecisionProcessing()

bool AudioProcessorGraph::AudioGraphIOProcessor::supportsDoublePrecisionProcessing ( ) const

overridevirtual

Returns true if the Audio processor supports double precision floating point processing.

The default implementation will always return false. If you return true here then you must override the double precision versions of processBlock. Additionally, you must call getProcessingPrecision() in your prepareToPlay method to determine the precision with which you need to allocate your internal buffers.

See also: getProcessingPrecision, setProcessingPrecision

Reimplemented from AudioProcessor.

◆ supportsMPE()

virtual bool AudioProcessor::supportsMPE ( ) const

inlinevirtualinherited

Returns true if the processor supports MPE.

◆ suspendProcessing()

void AudioProcessor::suspendProcessing ( bool shouldBeSuspended )

inherited

Enables and disables the processing callback.

If you need to do something time-consuming on a thread and would like to make sure the audio processing callback doesn't happen until you've finished, use this to disable the callback and re-enable it again afterwards.

E.g.

void loadNewPatch()
{
    suspendProcessing (true);
    ..do something that takes ages..
    suspendProcessing (false);
}

If the host tries to make an audio callback while processing is suspended, the filter will return an empty buffer, but won't block the audio thread like it would do if you use the getCallbackLock() critical section to synchronise access.

Any code that calls processBlock() should call isSuspended() before doing so, and if the processor is suspended, it should avoid the call and emit silence or whatever is appropriate.

See also: getCallbackLock

Referenced by AudioProcessor::getCallbackLock().

◆ updateHostDisplay()

void AudioProcessor::updateHostDisplay ( )

inherited

The filter can call this when something (apart from a parameter value) has changed.

It sends a hint to the host that something like the program, number of parameters, etc, has changed, and that it should update itself.

Referenced by AudioProcessor::getActiveEditor().

Member Data Documentation

◆ graph

AudioProcessorGraph* AudioProcessorGraph::AudioGraphIOProcessor::graph

private

◆ playHead

AudioPlayHead* AudioProcessor::playHead

protectedinherited

Referenced by AudioProcessor::getPlayHead().

◆ type

const IODeviceType AudioProcessorGraph::AudioGraphIOProcessor::type

private

◆ wrapperType

WrapperType AudioProcessor::wrapperType

inherited

When loaded by a plugin wrapper, this flag will be set to indicate the type of plugin within which the processor is running.

The documentation for this class was generated from the following file:

juce_AudioProcessorGraph.h

Public Types

Public Member Functions

Static Public Member Functions

Public Attributes

Protected Member Functions

Protected Attributes

Private Member Functions

Private Attributes

Detailed Description

Member Enumeration Documentation

◆ IODeviceType

◆ ProcessingPrecision

◆ WrapperType

Constructor & Destructor Documentation

◆ AudioGraphIOProcessor()

◆ ~AudioGraphIOProcessor()

Member Function Documentation

◆ acceptsMidi()

◆ addBus()

◆ addListener()

◆ addParameter()

◆ beginParameterChangeGesture()

◆ canAddBus()

◆ canApplyBusCountChange()

◆ canApplyBusesLayout()

◆ canRemoveBus()

◆ changeProgramName()

◆ checkBusesLayoutSupported()

◆ containsLayout()

◆ copyXmlToBinary()

◆ createEditor()

◆ createEditorIfNeeded()

◆ disableNonMainBuses()

◆ editorBeingDeleted()

◆ enableAllBuses()

◆ endParameterChangeGesture()

◆ fillInPluginDescription()

◆ getAAXPluginIDForMainBusConfig()

◆ getActiveEditor()

◆ getAlternateDisplayNames()

◆ getBlockSize()

◆ getBus() [1/2]

◆ getBus() [2/2]

◆ getBusBuffer()

◆ getBusCount()

◆ getBusesLayout()

◆ getCallbackLock()

◆ getChannelCountOfBus()

◆ getChannelIndexInProcessBlockBuffer()

◆ getChannelLayoutOfBus()

◆ getCurrentProgram()

◆ getCurrentProgramStateInformation()

◆ getDefaultNumParameterSteps()

◆ getLatencySamples()

◆ getMainBusNumInputChannels()

◆ getMainBusNumOutputChannels()

◆ getName()

◆ getNextBestLayoutInLayoutList()

◆ getNumParameters()

◆ getNumPrograms()

◆ getOffsetInBusBufferForAbsoluteChannelIndex()

◆ getParameter()

◆ getParameterCategory()

◆ getParameterDefaultValue()

◆ getParameterID()

◆ getParameterLabel()

◆ getParameterName() [1/2]

◆ getParameterName() [2/2]

◆ getParameterNumSteps()

◆ getParameters()

◆ getParameterText() [1/2]

◆ getParameterText() [2/2]

◆ getParentGraph()

◆ getPlatformSpecificData()

◆ getPlayHead()

◆ getPluginDescription()

◆ getProcessingPrecision()

◆ getProgramName()

◆ getSampleRate()

◆ getStateInformation()