A type of AudioFormatReader that reads from an audio CD. More...

#include <juce_AudioCDReader.h>

Inheritance diagram for AudioCDReader:

Collaboration diagram for AudioCDReader:

[legend]

Public Types
enum	{ framesPerSecond = 75, samplesPerFrame = 44100 / framesPerSecond }

Public Member Functions
	~AudioCDReader ()
	Destructor. More...

void	ejectDisk ()
	Tries to eject the disk. More...

void	enableIndexScanning (bool enabled)
	Enables scanning for indexes within tracks. More...

Array< int >	findIndexesInTrack (const int trackNumber)
	Scans a track to find the position of any indexes within it. More...

int	getCDDBId ()
	Returns the CDDB id number for the CD. More...

virtual AudioChannelSet	getChannelLayout ()
	Get the channel layout of the audio stream. More...

const String &	getFormatName () const noexcept
	Returns a description of what type of format this is. More...

int	getLastIndex () const
	Returns the index number found during the last read() call. More...

int	getNumTracks () const
	Returns the total number of tracks (audio + data). More...

int	getPositionOfTrackStart (int trackNum) const
	Finds the sample offset of the start of a track. More...

const Array< int > &	getTrackOffsets () const
	Returns an array of sample offsets for the start of each track, followed by the sample position of the end of the CD. More...

bool	isCDStillPresent () const
	Checks whether the CD has been removed from the drive. More...

bool	isTrackAudio (int trackNum) const
	Returns true if a given track is an audio track. More...

bool	read (int const destSamples, int numDestChannels, int64 startSampleInSource, int numSamplesToRead, bool fillLeftoverChannelsWithCopies)
	Reads samples from the stream. More...

void	read (AudioSampleBuffer *buffer, int startSampleInDestBuffer, int numSamples, int64 readerStartSample, bool useReaderLeftChan, bool useReaderRightChan)
	Fills a section of an AudioSampleBuffer from this reader. More...

virtual void	readMaxLevels (int64 startSample, int64 numSamples, Range< float > *results, int numChannelsToRead)
	Finds the highest and lowest sample levels from a section of the audio stream. More...

virtual void	readMaxLevels (int64 startSample, int64 numSamples, float &lowestLeft, float &highestLeft, float &lowestRight, float &highestRight)
	Finds the highest and lowest sample levels from a section of the audio stream. More...

bool	readSamples (int **destSamples, int numDestChannels, int startOffsetInDestBuffer, int64 startSampleInFile, int numSamples) override
	Implementation of the AudioFormatReader method. More...

void	refreshTrackLengths ()
	Refreshes the object's table of contents. More...

int64	searchForLevel (int64 startSample, int64 numSamplesToSearch, double magnitudeRangeMinimum, double magnitudeRangeMaximum, int minimumConsecutiveSamples)
	Scans the source looking for a sample whose magnitude is in a specified range. More...

Static Public Member Functions
static AudioCDReader *	createReaderForCD (const int index)
	Tries to create an AudioFormatReader that can read from an Audio CD. More...

static StringArray	getAvailableCDNames ()
	Returns a list of names of Audio CDs currently available for reading. More...

Public Attributes
unsigned int	bitsPerSample
	The number of bits per sample, e.g. More...

InputStream *	input
	The input stream, for use by subclasses. More...

int64	lengthInSamples
	The total number of samples in the audio stream. More...

StringPairArray	metadataValues
	A set of metadata values that the reader has pulled out of the stream. More...

unsigned int	numChannels
	The total number of channels in the audio stream. More...

double	sampleRate
	The sample-rate of the stream. More...

bool	usesFloatingPointData
	Indicates whether the data is floating-point or fixed. More...

Static Protected Member Functions
static void	clearSamplesBeyondAvailableLength (int **destSamples, int numDestChannels, int startOffsetInDestBuffer, int64 startSampleInFile, int &numSamples, int64 fileLengthInSamples)
	Used by AudioFormatReader subclasses to clear any parts of the data blocks that lie beyond the end of their available length. More...

Private Member Functions
	AudioCDReader (const File &volume)

Private Attributes
int	currentReaderTrack

ScopedPointer< AudioFormatReader >	reader

Array< File >	tracks

Array< int >	trackStartSamples

File	volumeDir

Detailed Description

A type of AudioFormatReader that reads from an audio CD.

One of these can be used to read a CD as if it's one big audio stream. Use the getPositionOfTrackStart() method to find where the individual tracks are within the stream.

See also: AudioFormatReader

Member Enumeration Documentation

◆ anonymous enum

anonymous enum

Enumerator
framesPerSecond
samplesPerFrame

Constructor & Destructor Documentation

◆ ~AudioCDReader()

AudioCDReader::~AudioCDReader ( )

Destructor.

◆ AudioCDReader()

AudioCDReader::AudioCDReader ( const File & volume )

private

Member Function Documentation

◆ clearSamplesBeyondAvailableLength()

static void AudioFormatReader::clearSamplesBeyondAvailableLength	(	int **	destSamples,
		int	numDestChannels,
		int	startOffsetInDestBuffer,
		int64	startSampleInFile,
		int &	numSamples,
		int64	fileLengthInSamples
	)

inlinestaticprotectedinherited

Used by AudioFormatReader subclasses to clear any parts of the data blocks that lie beyond the end of their available length.

References jassert, and zeromem().

◆ createReaderForCD()

static AudioCDReader* AudioCDReader::createReaderForCD ( const int index )

static

Tries to create an AudioFormatReader that can read from an Audio CD.

Parameters

index the index of one of the available CDs - use getAvailableCDNames() to find out how many there are.

Returns: a new AudioCDReader object, or nullptr if it couldn't be created. The caller will be responsible for deleting the object returned.

◆ ejectDisk()

void AudioCDReader::ejectDisk ( )

Tries to eject the disk.

Ejecting the disk might not actually be possible, e.g. if some other process is using it.

◆ enableIndexScanning()

void AudioCDReader::enableIndexScanning ( bool enabled )

Enables scanning for indexes within tracks.

See also: getLastIndex

◆ findIndexesInTrack()

Array<int> AudioCDReader::findIndexesInTrack ( const int trackNumber )

Scans a track to find the position of any indexes within it.

Parameters

trackNumber the track to look in, where 0 is the first track on the disc

Returns: an array of sample positions of any index points found (not including the index that marks the start of the track)

◆ getAvailableCDNames()

static StringArray AudioCDReader::getAvailableCDNames ( )

static

Returns a list of names of Audio CDs currently available for reading.

If there's a CD drive but no CD in it, this might return an empty list, or possibly a device that can be opened but which has no tracks, depending on the platform.

See also: createReaderForCD

◆ getCDDBId()

int AudioCDReader::getCDDBId ( )

Returns the CDDB id number for the CD.

It's not a great way of identifying a disc, but it's traditional.

◆ getChannelLayout()

virtual AudioChannelSet AudioFormatReader::getChannelLayout ( )

virtualinherited

Get the channel layout of the audio stream.

◆ getFormatName()

const String& AudioFormatReader::getFormatName ( ) const

inlinenoexceptinherited

Returns a description of what type of format this is.

E.g. "AIFF"

◆ getLastIndex()

int AudioCDReader::getLastIndex ( ) const

Returns the index number found during the last read() call.

Index scanning is turned off by default - turn it on with enableIndexScanning().

Then when the read() method is called, if it comes across an index within that block, the index number is stored and returned by this method.

Some devices might not support indexes, of course.

(If you don't know what CD indexes are, it's unlikely you'll ever need them).

See also: enableIndexScanning

◆ getNumTracks()

int AudioCDReader::getNumTracks ( ) const

Returns the total number of tracks (audio + data).

◆ getPositionOfTrackStart()

int AudioCDReader::getPositionOfTrackStart ( int trackNum ) const

Finds the sample offset of the start of a track.

Parameters

trackNum the track number, where trackNum = 0 is the first track and trackNum = getNumTracks() means the end of the CD.

◆ getTrackOffsets()

const Array<int>& AudioCDReader::getTrackOffsets ( ) const

Returns an array of sample offsets for the start of each track, followed by the sample position of the end of the CD.

◆ isCDStillPresent()

bool AudioCDReader::isCDStillPresent ( ) const

Checks whether the CD has been removed from the drive.

◆ isTrackAudio()

bool AudioCDReader::isTrackAudio ( int trackNum ) const

Returns true if a given track is an audio track.

Parameters

trackNum the track number, where 0 is the first track.

◆ read() [1/2]

bool AudioFormatReader::read	(	int const	destSamples,
		int	numDestChannels,
		int64	startSampleInSource,
		int	numSamplesToRead,
		bool	fillLeftoverChannelsWithCopies
	)

inherited

Reads samples from the stream.

Parameters

destSamples	an array of buffers into which the sample data for each channel will be written. If the format is fixed-point, each channel will be written as an array of 32-bit signed integers using the full range -0x80000000 to 0x7fffffff, regardless of the source's bit-depth. If it is a floating-point format, you should cast the resulting array to a (float**) to get the values (in the range -1.0 to 1.0 or beyond) If the format is stereo, then destSamples[0] is the left channel data, and destSamples[1] is the right channel. The numDestChannels parameter indicates how many pointers this array contains, but some of these pointers can be null if you don't want to read data for some of the channels
numDestChannels	the number of array elements in the destChannels array
startSampleInSource	the position in the audio file or stream at which the samples should be read, as a number of samples from the start of the stream. It's ok for this to be beyond the start or end of the available data - any samples that are out-of-range will be returned as zeros.
numSamplesToRead	the number of samples to read. If this is greater than the number of samples that the file or stream contains. the result will be padded with zeros
fillLeftoverChannelsWithCopies	if true, this indicates that if there's no source data available for some of the channels that you pass in, then they should be filled with copies of valid source channels. E.g. if you're reading a mono file and you pass 2 channels to this method, then if fillLeftoverChannelsWithCopies is true, both destination channels will be filled with the same data from the file's single channel. If fillLeftoverChannelsWithCopies was false, then only the first channel would be filled with the file's contents, and the second would be cleared. If there are many channels, e.g. you try to read 4 channels from a stereo file, then the last 3 would all end up with copies of the same data.

Returns: true if the operation succeeded, false if there was an error. Note that reading sections of data beyond the extent of the stream isn't an error - the reader should just return zeros for these regions

See also: readMaxLevels

◆ read() [2/2]

void AudioFormatReader::read	(	AudioSampleBuffer *	buffer,
		int	startSampleInDestBuffer,
		int	numSamples,
		int64	readerStartSample,
		bool	useReaderLeftChan,
		bool	useReaderRightChan
	)

inherited

Fills a section of an AudioSampleBuffer from this reader.

This will convert the reader's fixed- or floating-point data to the buffer's floating-point format, and will try to intelligently cope with mismatches between the number of channels in the reader and the buffer.

◆ readMaxLevels() [1/2]

virtual void AudioFormatReader::readMaxLevels	(	int64	startSample,
		int64	numSamples,
		Range< float > *	results,
		int	numChannelsToRead
	)

virtualinherited

Finds the highest and lowest sample levels from a section of the audio stream.

This will read a block of samples from the stream, and measure the highest and lowest sample levels from the channels in that section, returning these as normalised floating-point levels.

Parameters

startSample	the offset into the audio stream to start reading from. It's ok for this to be beyond the start or end of the stream.
numSamples	how many samples to read
results	this array will be filled with Range values for each channel. The array must contain numChannels elements.
numChannelsToRead	the number of channels of data to scan. This must be more than zero, but not more than the total number of channels that the reader contains

See also: read

Reimplemented in AudioSubsectionReader.

◆ readMaxLevels() [2/2]

virtual void AudioFormatReader::readMaxLevels	(	int64	startSample,
		int64	numSamples,
		float &	lowestLeft,
		float &	highestLeft,
		float &	lowestRight,
		float &	highestRight
	)

virtualinherited

Finds the highest and lowest sample levels from a section of the audio stream.

This will read a block of samples from the stream, and measure the highest and lowest sample levels from the channels in that section, returning these as normalised floating-point levels.

Parameters

startSample	the offset into the audio stream to start reading from. It's ok for this to be beyond the start or end of the stream.
numSamples	how many samples to read
lowestLeft	on return, this is the lowest absolute sample from the left channel
highestLeft	on return, this is the highest absolute sample from the left channel
lowestRight	on return, this is the lowest absolute sample from the right channel (if there is one)
highestRight	on return, this is the highest absolute sample from the right channel (if there is one)

See also: read

◆ readSamples()

bool AudioCDReader::readSamples	(	int **	destSamples,
		int	numDestChannels,
		int	startOffsetInDestBuffer,
		int64	startSampleInFile,
		int	numSamples
	)

overridevirtual

Implementation of the AudioFormatReader method.

Implements AudioFormatReader.

◆ refreshTrackLengths()

void AudioCDReader::refreshTrackLengths ( )

Refreshes the object's table of contents.

If the disc has been ejected and a different one put in since this object was created, this will cause it to update its idea of how many tracks there are, etc.

◆ searchForLevel()

int64 AudioFormatReader::searchForLevel	(	int64	startSample,
		int64	numSamplesToSearch,
		double	magnitudeRangeMinimum,
		double	magnitudeRangeMaximum,
		int	minimumConsecutiveSamples
	)

inherited

Scans the source looking for a sample whose magnitude is in a specified range.

This will read from the source, either forwards or backwards between two sample positions, until it finds a sample whose magnitude lies between two specified levels.

If it finds a suitable sample, it returns its position; if not, it will return -1.

There's also a minimumConsecutiveSamples setting to help avoid spikes or zero-crossing points when you're searching for a continuous range of samples

Parameters

startSample	the first sample to look at
numSamplesToSearch	the number of samples to scan. If this value is negative, the search will go backwards
magnitudeRangeMinimum	the lowest magnitude (inclusive) that is considered a hit, from 0 to 1.0
magnitudeRangeMaximum	the highest magnitude (inclusive) that is considered a hit, from 0 to 1.0
minimumConsecutiveSamples	if this is > 0, the method will only look for a sequence of this many consecutive samples, all of which lie within the target range. When it finds such a sequence, it returns the position of the first in-range sample it found (i.e. the earliest one if scanning forwards, the latest one if scanning backwards)

Member Data Documentation

◆ bitsPerSample

unsigned int AudioFormatReader::bitsPerSample

inherited

The number of bits per sample, e.g.

16, 24, 32.

◆ currentReaderTrack

int AudioCDReader::currentReaderTrack

private

◆ input

InputStream* AudioFormatReader::input

inherited

The input stream, for use by subclasses.

◆ lengthInSamples

int64 AudioFormatReader::lengthInSamples

inherited

The total number of samples in the audio stream.

◆ metadataValues

StringPairArray AudioFormatReader::metadataValues

inherited

A set of metadata values that the reader has pulled out of the stream.

Exactly what these values are depends on the format, so you can check out the format implementation code to see what kind of stuff they understand.

◆ numChannels

unsigned int AudioFormatReader::numChannels

inherited

The total number of channels in the audio stream.

◆ reader

ScopedPointer<AudioFormatReader> AudioCDReader::reader

private

◆ sampleRate

double AudioFormatReader::sampleRate

inherited

The sample-rate of the stream.

◆ tracks

Array<File> AudioCDReader::tracks

private

◆ trackStartSamples

Array<int> AudioCDReader::trackStartSamples

private

◆ usesFloatingPointData

bool AudioFormatReader::usesFloatingPointData

inherited

Indicates whether the data is floating-point or fixed.

◆ volumeDir

File AudioCDReader::volumeDir

private

The documentation for this class was generated from the following file:

juce_AudioCDReader.h

Public Types

Public Member Functions

Static Public Member Functions

Public Attributes

Static Protected Member Functions

Private Member Functions

Private Attributes

Detailed Description

Member Enumeration Documentation

◆ anonymous enum

Constructor & Destructor Documentation

◆ ~AudioCDReader()

◆ AudioCDReader()

Member Function Documentation

◆ clearSamplesBeyondAvailableLength()

◆ createReaderForCD()

◆ ejectDisk()

◆ enableIndexScanning()

◆ findIndexesInTrack()

◆ getAvailableCDNames()

◆ getCDDBId()

◆ getChannelLayout()

◆ getFormatName()

◆ getLastIndex()

◆ getNumTracks()

◆ getPositionOfTrackStart()

◆ getTrackOffsets()

◆ isCDStillPresent()

◆ isTrackAudio()

◆ read() [1/2]

◆ read() [2/2]

◆ readMaxLevels() [1/2]

◆ readMaxLevels() [2/2]

◆ readSamples()

◆ refreshTrackLengths()

◆ searchForLevel()

Member Data Documentation

◆ bitsPerSample

◆ currentReaderTrack

◆ input

◆ lengthInSamples

◆ metadataValues

◆ numChannels

◆ reader

◆ sampleRate

◆ tracks

◆ trackStartSamples

◆ usesFloatingPointData

◆ volumeDir